SCSI paska a Debian

[Vladimir Naprstek]

Marek Mergl napsal(a):
> 
> SCSI subsystem driver Revision: 1.00
> Red Hat/Adaptec aacraid driver, Dec  5 2003
> AAC0: kernel 4.0.4 build 6008
> AAC0: monitor 4.0.4 build 6008
> AAC0: bios 4.0.0 build 6008
> AAC0: serial 0b96154
> scsi0 : aacraid
>  Vendor: ADAPTEC   Model: Adaptec Volume    Rev: V1.0
>  Type:   Direct-Access                      ANSI SCSI revision: 02

je tohle ten scsi radic, ke kteremu je pripojena ta paska nebo je to 
nejaky jiny?


> scsi1 : SCSI host adapter emulation for IDE ATAPI devices
>  Vendor: LITEON    Model: CD-ROM LTN526S    Rev: YS0J
>  Type:   CD-ROM                             ANSI SCSI revision: 02
CDcko nas nezajima...

> Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
> SCSI device sda: 143357184 512-byte hdwr sectors (73399 MB)
> sda: Write Protect is off
> Partition check:
> sda: sda1 sda2 < sda5 sda6 >
> Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
> sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.12
> md: linear personality registered as nr 1
> md: raid0 personality registered as nr 2
> md: raid1 personality registered as nr 3
> md: raid5 personality registered as nr 4
> raid5: measuring checksumming speed
>   8regs     :  3011.600 MB/sec
>   32regs    :  2228.800 MB/sec
>   pIII_sse  :  3394.000 MB/sec
>   pII_mmx   :  3047.200 MB/sec
>   p5_mmx    :  3042.800 MB/sec
> raid5: using function: pIII_sse (3394.000 MB/sec)
> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> device-mapper: 4.0.5-ioctl (2003-11-18) initialised: dm na uk.sistina.com
a az sem to jsou disky...

Predpokladam, ze v tom stroji je jeste jedna karta a k ni je ta paska 
pripojena. A o te ve vypise nic neni. Nebo je to pripojene k tomuhle 
radici? Mate podporu scsi pasek (CONFIG_CHR_DEV_ST nebo modul st.o)?

pokud zavedete modul st, pribudou v dmesg nejaky zpravy? Nebo je v dmesg 
neco o modulu st?

-- 
Vladimír Náprstek
mail: vladimir.naprstek na scplyn.cz