2.6.11 a UDMA

[Ondra Holecek]

Radomir Fojtik wrote:
> Mate v jadre povolen vas chipset?

nebyl zkompilovan, tak jsem ho dokompiloval jako modul a nahral. dmesg
po nahrani (modprobe via82cxxx) ukazal:


VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
VP_IDE: port 0x01f0 already claimed by ide0
VP_IDE: port 0x0170 already claimed by ide1
VP_IDE: neither IDE port enabled (BIOS)
ide0: Speed warnings UDMA 3/4/5 is not functional.


presto hdparm -d 1 /dev/hda vypisuje porad stejnou chybovou hlasku.
pokud myslite ze to neco zmeni, mohu ho jeste napevno zakompilovat do
jadra (ne jen jako modul)

relevantni cast lspci -v:

00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/
C/VT8235 PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 7120
        Flags: bus master, medium devsel, latency 32, IRQ 255
        I/O ports at fc00 [size=16]
        Capabilities: [c0] Power Management version 2


a dmesg cast o discich:

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: ST3120026A, ATA DISK drive
Probing IDE interface ide1...
hdc: LITE-ON DVDRW SOHW-1653S, ATAPI CD/DVD-ROM drive
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4