RE: Zase problém s ACPI

[Dejma]

Omlouvám se za motaninu, Milan Keršláger mi pojmy již vysvětlil, avšak můj
problém přetrvává. Zkoušel jsem  jak noapic tak disableapic = je to stále
stejné, viz messages

a takhle mi to mrví messages při normálním provozu, messages velmi bobtná:
Jan  3 16:32:01 apm last message repeated 2 times 
Jan  3 16:32:01 apm kernel: APIC error on CPU0: 40(08) 
Jan  3 16:32:01 apm kernel: APIC error on CPU0: 08(40) 
Jan  3 16:32:01 apm kernel: APIC error on CPU0: 40(40) 
Jan  3 16:32:01 apm kernel: APIC error on CPU0: 40(40) 
Jan  3 16:32:39 apm ntpd[1848]: synchronized to 195.250.155.25, stratum=2
Jan  3 16:33:00 apm CROND[3948]: (root) CMD ( php
/var/www/html/cacti/poller.php > /dev/null 2>&1)


################################# DISABLEAPIC #######################
kernel: ACPI: PM-Timer IO Port: 0x4008
kernel: Built 1 zonelists
kernel: Local APIC disabled by BIOS -- reenabling.
kernel: Found and enabled local APIC!
kernel: Initializing CPU#0
kernel: Kernel command line: auto BOOT_IMAGE=linux ro root=301
resume=/dev/hda5 disableapic
kernel: PID hash table entries: 512 (order 9: 4096 bytes)
kernel: Detected 1000.249 MHz processor.
kernel: Using pmtmr for high-res timesource
kernel: Console: colour VGA+ 80x50
kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
kernel: Memory: 125116k/129984k available (1859k kernel code, 4324k
reserved, 578k data, 200k init, 0k highmem, 0k BadRAM)
kernel: Checking if this processor honours the WP bit even in supervisor
mode... Ok.
kernel: Calibrating delay loop... 1982.46 BogoMIPS
kernel: Security Scaffold v1.0.0 initialized


##################################### NOAPIC #########################
kernel: ACPI: RSDP (v000 AOPEN                                     ) @
0x000f6730
kernel: ACPI: RSDT (v001 AOPEN  AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x07ef3000
kernel: ACPI: FADT (v001 AOPEN  AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x07ef3040
kernel: ACPI: DSDT (v001 AOPEN  AWRDACPI 0x00001000 MSFT 0x0100000c) @
0x00000000
kernel: ACPI: PM-Timer IO Port: 0x4008
kernel: Built 1 zonelists
kernel: Local APIC disabled by BIOS -- reenabling.
kernel: Found and enabled local APIC!
kernel: Initializing CPU#0
kernel: Kernel command line: auto BOOT_IMAGE=linux ro root=301
resume=/dev/hda5 noapic
kernel: PID hash table entries: 512 (order 9: 4096 bytes)
kernel: Detected 1000.057 MHz processor.
kernel: Using pmtmr for high-res timesource
kernel: Console: colour VGA+ 80x50
kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
kernel: Memory: 125116k/129984k available (1859k kernel code, 4324k
reserved, 578k data, 200k init, 0k highmem, 0k BadRAM)
kernel: Checking if this processor honours the WP bit even in supervisor
mode... Ok.
kernel: Calibrating delay loop... 1982.46 BogoMIPS
kernel: Security Scaffold v1.0.0 initialized
kernel: SELinux:  Disabled at boot.
kernel: Capability LSM initialized
kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
kernel: CPU: L2 cache: 256K
kernel: Intel machine check architecture supported.
kernel: Intel machine check reporting enabled on CPU#0.
kernel: CPU: Intel(R) Celeron(TM) CPU                1000MHz stepping 01
kernel: Enabling fast FPU save and restore... done.
kernel: Enabling unmasked SIMD FPU exception support... done.
kernel: Checking 'hlt' instruction... OK.
kernel: init init/main.c:689
kernel: init init/main.c:702
kernel: init init/main.c:707
kernel: do_pre_smp_initcalls init/main.c:653
kernel: do_pre_smp_initcalls init/main.c:659
kernel: init init/main.c:711
kernel: init init/main.c:714
kernel: enabled ExtINT on CPU#0
kernel: ESR value before enabling vector: 00000000
kernel: ESR value after enabling vector: 00000000
kernel: Using local APIC timer interrupts.
kernel: calibrating APIC timer ...
kernel: ..... CPU clock speed is 999.0864 MHz.
kernel: ..... host bus clock speed is 99.0986 MHz.
kernel: init init/main.c:716


S pozdravem
	Jiří (Dejma) Dimitrov

> Dejma wrote:
> > .....................
> > Po naistalování jsem omrknul logy, a v messages straší:
> > Jan  3 12:01:00 apm kernel: APIC error on CPU0: 40(08)
> > Jan  3 12:01:00 apm kernel: APIC error on CPU0: 08(40)
> > Jan  3 12:01:00 apm kernel: APIC error on CPU0: 40(40)
> > Jan  3 12:01:00 apm kernel: APIC error on CPU0: 40(40)
> > .........
> 
> APIC != ACPI
> 
> Kdyztak zkuste pri bootu volbu "noapic"
> 
> Roman DAVID