[Fwd: Re: single NIC router]

[Miroslav Betak]

Toto je presne ono.
Zistil som, ze je trebe mat sucasne nastavene:
sysctl -w net.ipv4.conf.eth0.send_redirects=0
a
sysctl -w net.ipv4.conf.all.send_redirects=0

       Vdaka

Aky je rozdiel  medzi:
   

net.ipv4.conf.eth0.send_redirects=0
net.ipv4.conf.all.send_redirects=0
net.ipv4.conf.default.send_redirects=0

			Miro


Peter Surda wrote:

>On Mon, 14 Nov 2005 19:38:05 +0100 Miroslav Betak <betak na orga.sk> wrote:
>
>  
>
>>Zaujima ma iba ta sekundarna IP adresa.
>>Ked som pouzil tento sposob (nastavenie viacerych IP adries jednemu fyzickemu
>>interface-u), okamzite mi linux router vratil ICMP redirect.
>>    
>>
>sysctl -w net.ipv4.conf.eth0.send_redirects=0 \
>net.ipv4.conf.eth0.accept_redirects=0
>
>pripadne este 
>iptables -A OUTPUT -o eth0 -p icmp --icmp-type host-redirect -j DROP
>
>(za predpokladu ze ten interface je eth0)
>
>  
>
>>Nedokazem sa dostat cez takto nastaveny router z PC v jednej sieti
>>(napr. 192.168.0.5) na PC v druhej sieti (napr 10.0.0.5).
>>    
>>
>To bude mozno prave tym redirectom.
>
>  
>
>>        Miro
>>    
>>
>S pozdravom,
>Peter
>
>  
>