USB kabel pl2303 k NOKII a kernel 2.6.12-1.1378_FC3smp - odpojovani

[Zdeněk Habala]

Na stroji, kde mi to bez problému fungovalo mám v messages toto:

Nov  2 16:47:58 gw kernel: usb 1-2: new full speed USB device using uhci_hcd
and address 2
Nov  2 16:48:02 gw kernel: usbcore: registered new driver usbserial
Nov  2 16:48:02 gw kernel: drivers/usb/serial/usb-serial.c: USB Serial
support registered for Generic
Nov  2 16:48:02 gw kernel: usbcore: registered new driver usbserial_generic
Nov  2 16:48:02 gw kernel: drivers/usb/serial/usb-serial.c: USB Serial
Driver core v2.0
Nov  2 16:48:02 gw kernel: drivers/usb/serial/usb-serial.c: USB Serial
support registered for PL-2303
Nov  2 16:48:02 gw kernel: pl2303 1-2:1.0: PL-2303 converter detected
Nov  2 16:48:02 gw kernel: usb 1-2: PL-2303 converter now attached to
ttyUSB0
Nov  2 16:48:02 gw kernel: usbcore: registered new driver pl2303
Nov  2 16:48:02 gw kernel: drivers/usb/serial/pl2303.c: Prolific PL2303 USB
to serial adaptor driver v0.12

A dál už nic až odpojení zařízení.

A tam kde to blbne mám to stejné:

Nov 20 09:29:43 localhost kernel: usb 2-2: new full speed USB device using
uhci_hcd and address 2
Nov 20 09:29:43 localhost kernel: usbcore: registered new driver usbserial
Nov 20 09:29:43 localhost kernel: drivers/usb/serial/usb-serial.c: USB
Serial support registered for Generic
Nov 20 09:29:43 localhost kernel: usbcore: registered new driver
usbserial_generic
Nov 20 09:29:43 localhost kernel: drivers/usb/serial/usb-serial.c: USB
Serial Driver core v2.0
Nov 20 09:29:43 localhost kernel: drivers/usb/serial/usb-serial.c: USB
Serial support registered for PL-2303
Nov 20 09:29:43 localhost kernel: pl2303 2-2:1.0: PL-2303 converter detected
Nov 20 09:29:43 localhost kernel: usb 2-2: PL-2303 converter now attached to
ttyUSB0
Nov 20 09:29:43 localhost kernel: usbcore: registered new driver pl2303
Nov 20 09:29:43 localhost kernel: drivers/usb/serial/pl2303.c: Prolific
PL2303 USB to serial adaptor driver v0.12
 
a pak 09:34, 10:29, 11:47, 13:03, 14:20, 15:37, 16:53, 18:10, 18:32, 19:27,
20:43, 21:06, 22:00, 23:17, 00:34 atd toto:

Nov 20 23:17:51 localhost kernel: hub 2-0:1.0: port 2 disabled by hub
(EMI?), re-enabling...
Nov 20 23:17:51 localhost kernel: usb 2-2: USB disconnect, address 15
Nov 20 23:17:51 localhost kernel: PL-2303 ttyUSB0: PL-2303 converter now
disconnected from ttyUSB0
Nov 20 23:17:51 localhost kernel: pl2303 2-2:1.0: device disconnected
Nov 20 23:17:51 localhost kernel: usb 2-2: new full speed USB device using
uhci_hcd and address 16
Nov 20 23:17:51 localhost kernel: usb 2-2: device not accepting address 16,
error -71
Nov 20 23:17:51 localhost kernel: usb 2-2: new full speed USB device using
uhci_hcd and address 17
Nov 20 23:17:51 localhost kernel: pl2303 2-2:1.0: PL-2303 converter detected
Nov 20 23:17:51 localhost kernel: usb 2-2: PL-2303 converter now attached to
ttyUSB0


> 
> asi mimo misu - pouzivam 6230 ve win pres BT a pri kazdem 
> navazovani GPRS se mobil (pripojeni BT) 
> pripoji-odpoji-pripoji a pak teprve vytoci
> 
> naopak v Linuxu (FC4) jsem si tohoto nevsiml
> 
> MP