ND-6650a

[David Belohrad]

Zdravim,
mam na notebooku tuhle vypalovacku a nevim si s ni rady. Pouzivam gentoo 
2.6.14. Puvodne jsem mel staticke /dev a pozdeji jsem presel na devfs. 
Nevim kdy presne mi nastaly problemy s vypalovanim, jiste je, ze ve 
statickem
/dev vypalovacka fungovala jak ma. Nyni jsem zkusil vypalovat a nastal 
nejaky zvlastni problem - vypalovacka odmita z neznamych duvodu 
vypalovat. Pro zjisteni jak je vypalovacka napojena:
-----------------------------------------------------------
sundra david # cdrecord-ProDVD --scanbus
Cdrecord-ProDVD-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 
1995-2004 J�g Schilling
Unlocked features:
Limited features::
cdrecord-ProDVD: Warning: Running on Linux-2.6.14-gentoo-r4
cdrecord-ProDVD: There are unsettled issues with Linux-2.5 and newer.
cdrecord-ProDVD: If you have unexpected problems, please try Linux-2.4 
or Solaris.
Linux sg driver version: 3.5.33
Using libscg version 'schily-0.8'
scsibus0:
0,0,0 0) 'ATA ' 'FUJITSU MHV2100A' '0000' Disk
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
scsibus1:
1,0,0 100) '_NEC ' 'DVD+-RW ND-6650A' '102C' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
--------------------------------------------------------

pak zkousim vypalovat:

----------------------------------------------------------
sundra david # cdrecord-ProDVD dev=1,0,0 speed=16 -dao -data ./obrazky.img
Cdrecord-ProDVD-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 
1995-2004 J�g Schilling
Unlocked features:
Limited features:
cdrecord-ProDVD: Warning: Running on Linux-2.6.14-gentoo-r4
cdrecord-ProDVD: There are unsettled issues with Linux-2.5 and newer.
cdrecord-ProDVD: If you have unexpected problems, please try Linux-2.4 
or Solaris.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.33
Using libscg version 'schily-0.8'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD+-RW ND-6650A'
Revision : '102C'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord-ProDVD: Cannot attach driver for CD/DVD-Recorder.

---------------------------------
vypalovani je ukonceno nejakou bizarni chybou a zvlastni na tom je, ze 
pokud ted provedu jeste jednou --scanbus, zasekne se to pri zjistovani 
scsibus1.
Pri pohledu v dmesg jsou tam divne hlasky:

[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total PCIe = 16384
sr 1:0:0:0: timing out command, waited 0s
sr 1:0:0:0: timing out command, waited 0s
sr 1:0:0:0: timing out command, waited 0s
sr 1:0:0:0: timing out command, waited 0s
sr 1:0:0:0: timing out command, waited 0s
sr 1:0:0:0: timing out command, waited 0s
sr 1:0:0:0: timing out command, waited 0s
sr 1:0:0:0: timing out command, waited 0s
sr 1:0:0:0: timing out command, waited 0s
sr 1:0:0:0: timing out command, waited 0s
sr 1:0:0:0: timing out command, waited 0s
sr 1:0:0:0: timing out command, waited 0s
sr 1:0:0:0: timing out command, waited 0s
sr 1:0:0:0: timing out command, waited 90s
sr 1:0:0:0: timing out command, waited 90s
-----------------------------------------



nevite nekdo v cem je problem? proc to nefunguje? musim rici ze 
vypalovani v linuxu neni nijak jednoducha zalezitost a abych pravdu 
rekl, tak mam v tom pekny hokej. Rozdil mezi atapi/scsi, 
cdrecord/cdrecord-prodvd/cdrecord-jesteexistujejeden
a porad mi nejake vypalovani nefunguje. Navic podpora vypalovani 
double-layer dvd je take nejaka nedodelana, napr nechapu proc k3b 
nedetekuje ze chci vypalovat double-layer a porad mi na spodnim sidebaru 
ukazuje ze mam 2x vic dat nez se vleze na single-dvd.


kazdopadne diky za kazdou pomoc, uz me to hledani proc to porad 
nefunguje fakt nebavi. treba to bude nejaka jednoducha vec kterou jsem 
prehledl.

dik
dejfson