DVD+R - cim vypalovat ?

[Jan Krajdl]

2006/3/8, Vaclav PEROUTKA <vaclav.peroutka na st.com>:
>
> Zdravim vsechny,
>
> mam vypalovacku Lite-on SOHW1693S. Pomoci dvd+rw-tools v6.1 bez problemu
> vypalim DVD+RW (Verbatim SERL). Kdyz se ovsem snazim vypalit stejne
> soubory
> na DVD+R - nejde to.
>
> Muzete nekdo poradit, cim vypalujete na DVD+R vy a funguje to? Nebo jestli
> se nekdo setkal s timhle problemem a jak ho vyresil ?
>
> Delam to takhle (a uplne stejne jako na DVD-RW):
> ================================================
>                                                             21:37:23 77>
> /tmp/src/dvd+rw-tools-6.1/growisofs -speed=2 -dvd-compat -Z /dev/scd0 -r
> -U
> /home/vaclavp/BURN/AUDIO/
> Executing 'mkisofs -r -U /home/vaclavp/BURN/AUDIO/ | builtin_dd
> of=/dev/scd0 obs=32k seek=0'
> Warning: creating filesystem that does not conform to ISO-9660.
>   0.22% done, estimate finish Tue Mar  7 21:39:30 2006
>   0.44% done, estimate finish Tue Mar  7 21:39:30 2006
>   0.65% done, estimate finish Tue Mar  7 21:42:02 2006
> /dev/scd0: "Current Write Speed" is 6.1x1385KBps.
> ******************** po cca 10 minutach se objevi ***********************
> :-! the LUN is still in process of becoming ready, retrying in 5 secs...
>
>
> V DMESG vypisu se objevuje periodicky tohle:
> ============================================
> scsi : aborting command due to timeout : pid 144203, scsi0, channel 0, id
> 0, lun 0 0x2a 00 00 00 00 00 00 00 10 00
> hdc: irq timeout: status=0xd0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
> scsi0 channel 0 : resetting for second half of retries.
> SCSI bus is being reset for host 0 channel 0.



Já používám GUI K3B a tušim, že na +Rka to rw tools nepoužívá... klasický
cdrecord DVDčka nebere?

--
/ Kde nic neni, ani antivir nebere --> Linux \