interni ctecka SD karet

[Dalibor Straka]

On Fri, Nov 03, 2006 at 02:26:25PM +0100, Pavel Kroko Basak wrote:
> Dne pátek 03 listopad 2006 13:55 Dalibor Straka napsal(a):
> > On Fri, Nov 03, 2006 at 10:31:38AM +0100, Vladim?r N?prstek wrote:
> > > Zdravim,
> > > mam notebook (Compaq nc6120) s integrovanou cteckou karet, kterou nemohu
> > > rozchodit. Ctecka je (lspci):
> > > Generic system peripheral [0805]: Texas Instruments PCI6411, PCI6421,
> > > PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD)
> > > Controller
> > > 
> > 
> > Pro nejakou TI ctecku mam rozepsany ovladac, poslete vypis lpci -vx
> 
> mam ten notak taky tak posilam v priloze celej vypis:
> 
> 02:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
> 	Subsystem: Hewlett-Packard Company nx6110/nc6120
> 	Flags: bus master, medium devsel, latency 64, IRQ 10
> 	Memory at d0008000 (32-bit, non-prefetchable) [size=8K]
> 	Capabilities: [44] Power Management version 2
> 00: 4c 10 33 80 06 00 10 02 00 00 80 01 10 40 80 00
> 10: 00 80 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 9c 09
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 04 07 04
> 

Mam dobrou zpravu pro vas a spatnou pro me ;-)

00: 4c 10 33 80 => 0x104c a 0x8033
je presne to co jsem vyvijel. Nicmene nejaky rusak to poslal do lkml
a ja mam po zapoctaku. Je to ve 2.6.19-rc4 a moduly se jmenuji
modprobe tifm_7xx1 tifm_core tifm_sd

Ovladac, ktery jsem psal byl stejne jako ten v kernelu pro 0x803b (muj
notebook hp nx6325) i pro 0x8033 (matky notebook hp nx6125).

-- Dalibor Straka