Co se zmenilo v FC 6 - jak na x.org

Michal Polivka aout na atlas.cz
Neděle Říjen 29 20:33:22 CET 2006


Vážená konference,

aktualizoval jsem svůj systém z Fedory Core 4 na FC 6. Mám však problém
s nastavením obrazovky. Používám LCD Fujitsu Siemens P19-2, připojený
kvůli grafické kartě (Riva TNT2), pouze analogovým VGA kabelem.

Od aktualizace systému však mám obraz posunutý cca o 2 cm vpravo. V
předchozích verzích systému jsem problém řešil pomocí utilitky xvidtune.
Obraz jsem v ní vycentroval, vygeneroval řádek ModeLine do sekce
"Monitor" pro soubor xorg.conf. Po restartu xserveru vše fungovalo. V
nynější verzi distribuce však zmíněný postup nefunguje, přesněji obraz 
lze vycentrovat, stejně jako v předchozím, ale po restartu xserveru
zůstává stále posunutý. Podotýkám, že řádek ModeLine se nezmění zpět, 
tedy je tak, jak ho nakonfiguruji. Mám pocit, jakoby xserver jednoduše 
ignoroval řádek ModeLine. Pro ilustraci přikládám svůj soubor xorg.conf.

Poraďte, prosím, jak postupovat.

S díky a pozdravem

Michal P.

------------- další část ---------------
# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "single head configuration"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "P19-2"
	HorizSync    30.0 - 82.0
	VertRefresh  56.0 - 76.0
	ModeLine     "1280x1024" 108.00 1280 1368 1480 1688  1024 1025 1028 1066 +hsync +vsync
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "nv"
	VendorName  "Videocard vendor"
	BoardName   "RIVA TNT2"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection



Další informace o konferenci Linux