apcupsd APC SMART UPS 1500

Honza Novacek konference na cimboraservis.cz
Čtvrtek Září 28 21:42:11 CEST 2006


Dobrý den,
 zdravim konfenreci, potykam se s nasledujicim problemem.
 Mam upesku APC SmartUPS 1500 s USB kabelem.
 Pokud spustim apcupsd, neustale se ztraci a obnovuje spojeni s upeskou
 
v logu to potom vypada takto:
Thu Sep 28 20:45:12 CEST 2006  apcupsd 3.10.18 (21 July 2005) redhat startup succeeded
Thu Sep 28 20:45:29 CEST 2006  Communications with UPS restored.
Thu Sep 28 20:45:47 CEST 2006  Communications with UPS restored.
Thu Sep 28 20:46:04 CEST 2006  Communications with UPS restored.
Thu Sep 28 20:46:21 CEST 2006  Communications with UPS restored.
Thu Sep 28 20:46:37 CEST 2006  Communications with UPS restored.
Thu Sep 28 20:46:54 CEST 2006  Communications with UPS restored.
Thu Sep 28 20:47:10 CEST 2006  Communications with UPS restored.

dale v dmesg vidim pro me podivne veci:
hiddev96: USB HID v1.10 Device [American Power Conversion Smart-UPS 1500 FW:653.12.I USB FW:4.2] on usb-0000:00:1d.1-1
drivers/usb/input/hid-core.c: ctrl urb status -71 received
drivers/usb/input/hid-core.c: ctrl urb status -71 received
drivers/usb/input/hid-core.c: input irq status -84 received
usb 3-1: USB disconnect, address 29
usb 3-1: new low speed USB device using address 30
hiddev96: USB HID v1.10 Device [American Power Conversion Smart-UPS 1500 FW:653.12.I USB FW:4.2] on usb-0000:00:1d.1-1
drivers/usb/input/hid-core.c: input irq status -84 received
usb 3-1: USB disconnect, address 30


cat /proc/bus/usb/devices
T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 32 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=051d ProdID=0002 Rev= 0.06
S:  Manufacturer=American Power Conversion
S:  Product=Smart-UPS 1500 FW:653.12.I USB FW:4.2
S:  SerialNumber=AS0532327939
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 30mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   6 Ivl=100ms
 
apcaccess status
informace vypisuje, ale neustale se do konzole pise "Communications with UPS restored"


Zkousel jsem do apcupsd.conf ted tam mam
UPSCABLE usb
UPSTYPE usb

Myslite ze je vadna upska, kabel, nebo to mam spatne nastavene?

Diky,

Honza Novacek
 



Další informace o konferenci Linux