snmp MIB databaze

[Dalibor Toman]

On Tuesday, November 13, 2007 3:47 PM ,
Tomas Pelka <tompelka na atlas.cz> wrote:

mozna vedle - ale SNMPv2 MIB prohlizet pomoci SNMPv1 je podezrele, ze? 
(-v1 jako parametr snmpwalku)
D. Toman


> Zdravim vsechny.
> Pokusim se na desktopovem pocitaci rozbehnout snmpd.
>
> konfigurece v snmpd.conf
> --------------------------------------------
> com2sec local     localhost       public
> com2sec localNet  10.8.0.0/16     public
>
> group MyROSystem v1        local
> group MyROSystem v2c       local
> group MyROSystem usm       local
> group MyROGroup v1         localNet
> group MyROGroup v2c        localNet
> group MyROGroup usm        localNet
> group MyRWGroup v1         local
> group MyRWGroup v2c        local
> group MyRWGroup usm        local
>
> view all    included  .1                               80
> view system included  .iso.org.dod.internet.mgmt.mib-2.system
>
>
> access MyROSystem ""     any       noauth    exact  system none 
> none
> access MyROGroup ""      any       noauth    exact  all    none 
> none
> access MyRWGroup ""      any       noauth    exact  all    all 
> none
> -------------------------------------------
>
> Problem je v tom, ze ze standardniho stromu
> iso.org.dod.internet.mgmt.mib-2.system vidim pouze:
>
> -------------------------------------------
> pa-422:/ $ snmpwalk -v 1 -c public localhost \
> iso.org.dod.internet.mgmt.mib-2.tcp
>
> SNMPv2-MIB::sysDescr.0 = STRING: Linux PA-422-2 2.6.22-2-686 #1 SMP
> Fri
> Aug 31 00:24:01 UTC 2007 i686
> SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10
> DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (325197) 0:54:11.97
> SNMPv2-MIB::sysContact.0 = STRING: Root <root na localhost>
> SNMPv2-MIB::sysName.0 = STRING: PA-422-2
> SNMPv2-MIB::sysLocation.0 = STRING: PA-422-2
> SNMPv2-MIB::sysORLastChange.0 = Timeticks: (1) 0:00:00.01
> SNMPv2-MIB::sysORID.1 = OID: SNMPv2-MIB::snmpMIB
> SNMPv2-MIB::sysORID.2 = OID: TCP-MIB::tcpMIB
> SNMPv2-MIB::sysORID.3 = OID: IP-MIB::ip
> SNMPv2-MIB::sysORID.4 = OID: UDP-MIB::udpMIB
> SNMPv2-MIB::sysORID.5 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup
> SNMPv2-MIB::sysORID.6 = OID:
> SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance SNMPv2-MIB::sysORID.7
> = OID: SNMP-MPD-MIB::snmpMPDCompliance SNMPv2-MIB::sysORID.8 = OID:
> SNMP-USER-BASED-SM-MIB::usmMIBCompliance SNMPv2-MIB::sysORDescr.1 =
> STRING: The MIB module for SNMPv2 entities SNMPv2-MIB::sysORDescr.2 
> =
> STRING: The MIB module for managing TCP implementations
> SNMPv2-MIB::sysORDescr.3 = STRING: The MIB module for managing IP 
> and
> ICMP implementations
> SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for managing UDP
> implementations
> SNMPv2-MIB::sysORDescr.5 = STRING: View-based Access Control Model
> for SNMP. SNMPv2-MIB::sysORDescr.6 = STRING: The SNMP Management
> Architecture MIB. SNMPv2-MIB::sysORDescr.7 = STRING: The MIB for
> Message Processing and Dispatching.
> SNMPv2-MIB::sysORDescr.8 = STRING: The management information
> definitions for the SNMP User-based Security Model.
> SNMPv2-MIB::sysORUpTime.1 = Timeticks: (0) 0:00:00.00
> SNMPv2-MIB::sysORUpTime.2 = Timeticks: (0) 0:00:00.00
> SNMPv2-MIB::sysORUpTime.3 = Timeticks: (0) 0:00:00.00
> SNMPv2-MIB::sysORUpTime.4 = Timeticks: (0) 0:00:00.00
> SNMPv2-MIB::sysORUpTime.5 = Timeticks: (1) 0:00:00.01
> SNMPv2-MIB::sysORUpTime.6 = Timeticks: (1) 0:00:00.01
> SNMPv2-MIB::sysORUpTime.7 = Timeticks: (1) 0:00:00.01
> SNMPv2-MIB::sysORUpTime.8 = Timeticks: (1) 0:00:00.01
> End of MIB
> -------------------------------------------
>
> Cim by to mohlo byt zpusobeno, urcite nejaka chyba mezi zidli z
> klavesnici:) Nakopne me nekdo?
>
> Dekuji.