Radic SiI 3512A (StLab)
sniper_2 na centrum.cz
sniper_2 na centrum.cz
Sobota Únor 2 10:04:29 CET 2008
Zdravim,
mam problem rozchodit 2xsata RAID radic Silicon Image SiI 3512A v PCI slotu.
Detekce s modulem sata_sil probehne v poradku:
Feb 1 09:43:10 scsi2 : sata_sil
Feb 1 09:43:10 scsi3 : sata_sil
Feb 1 09:43:10 ata1: SATA max UDMA/100 mmio m512 na 0xdffffe00 tf 0xdffffe80 irq 11
Feb 1 09:43:10 ata2: SATA max UDMA/100 mmio m512 na 0xdffffe00 tf 0xdffffec0 irq 11
Feb 1 09:43:10 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Feb 1 09:43:10 ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
Feb 1 09:43:10 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Feb 1 09:43:10 ata1.00: configured for UDMA/100
Feb 1 09:43:10 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Feb 1 09:43:10 ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
Feb 1 09:43:10 ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Feb 1 09:43:10 ata2.00: configured for UDMA/100
Feb 1 09:43:10 scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
Feb 1 09:43:10 scsi 2:0:0:0: Attached scsi generic sg0 type 0
Feb 1 09:43:10 scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
Feb 1 09:43:10 scsi 3:0:0:0: Attached scsi generic sg1 type 0
avsak, pri jakemkoliv pristupu na disk je prenosova rychlost v radek kB/s a ovladac vypisuje:
Feb 1 09:45:11 ata2: port is slow to respond, please be patient (Status 0xff)
Feb 1 09:45:15 ata2: device not ready (errno=-16), forcing hardreset
Feb 1 09:45:15 ata2: hard resetting link
Feb 1 09:45:16 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Feb 1 09:45:16 ata2.00: configured for UDMA/66
Feb 1 09:45:16 ata2: EH complete
Feb 1 09:45:16 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 1 09:45:16 sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
Feb 1 09:45:16 sd 3:0:0:0: [sdb] Write Protect is off
Feb 1 09:45:16 sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Feb 1 09:45:16 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 1 09:45:16 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
Feb 1 09:45:16 ata2.00: cmd c8/00:00:3f:16:00/00:00:00:00:00/e0 tag 0 dma 131072 in
Feb 1 09:45:16 res ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
Feb 1 09:45:16 ata2.00: status: { Busy }
Feb 1 09:45:16 ata2.00: error: { ICRC UNC IDNF ABRT }
Feb 1 09:45:21 ata2: port is slow to respond, please be patient (Status 0xff)
Feb 1 09:45:26 ata2: device not ready (errno=-16), forcing hardreset
Feb 1 09:45:26 ata2: hard resetting link
Feb 1 09:45:27 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Feb 1 09:45:27 ata2.00: configured for UDMA/66
Feb 1 09:45:27 ata2: EH complete
Feb 1 09:45:27 sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
Feb 1 09:45:27 sd 3:0:0:0: [sdb] Write Protect is off
Feb 1 09:45:27 sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Feb 1 09:45:27 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 1 09:45:27 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Feb 1 09:45:27 ata2.00: BMDMA2 stat 0x6d0009
Feb 1 09:45:27 ata2.00: cmd c8/00:00:3f:1e:00/00:00:00:00:00/e0 tag 0 dma 131072 in
Feb 1 09:45:27 res 51/04:1f:20:1f:00/ff:ff:ff:ff:ff/e0 Emask 0x1 (device error)
Feb 1 09:45:27 ata2.00: status: { DRDY ERR }
Feb 1 09:45:27 ata2.00: error: { ABRT }
Feb 1 09:45:27 ata2.00: configured for UDMA/66
Feb 1 09:45:27 ata2: EH complete
Disky jsou naprosto nove,radic taky.
Dle http://lkml.org/lkml/2006/9/23/102 a nekolika dalsich prispevku by mel ovladac tuto chybu hazet vsem pod novejsimi jadry, a pod < 2.6.15 bezet.
Vyzkousel jsem tyto jadra ale se stejnym vysledkem:
linux-2.6.20
linux-2.6.24-gentoo
linux-2.6.12
Nemate nekdo zkusenost s kterym jadrem, pripadne jak pomoci nejakeho patche tuhle mrchu rozchodit?
Portage 2.1.2.2 (default-linux/x86/2007.0, gcc-4.1.1, glibc-2.5-r0, 2.6.24-gentoono_sleep_state i686)
=================================================================
System uname: 2.6.24-gentoono_sleep_state i686 AMD Athlon(tm) XP 2200+
Gentoo Base System release 1.12.9
Další informace o konferenci Linux