problemy s diskem

[Petr Baláš]

Zdravim

Odesel mi disk v RAIDu, reklamuji ho.
Koupil jsem misto neho novy a ten za chvilku zase zacal blbnout. dmesg
mi vypsal viz nize. Priznam se, ze si to nedokazu prelozit do lidstiny.
Tusi nekdo co se deje? A co zkontrolovat / otestovat?

System Debian stable
kernel 2.6.27.4 vanilka 32bit
deska - Intel DG43NB (je tam chvilku)
Disky Seagate (ten chodi) a Samsung (ten hlasi chyby) 750GB

Petr


ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x4050002 action 0xe frozen
ata2: SError: { RecovComm PHYRdyChg CommWake DevExch }
ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x14 (ATA bus error)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
end_request: I/O error, dev sdb, sector 31246271
md: super_written gets error=-5, uptodate=0
raid1: Disk failure on sdb1, disabling device.
raid1: Operation continuing on 1 devices.
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
RAID1 conf printout:
 --- wd:1 rd:2
 disk 0, wo:0, o:1, dev:sda1
 disk 1, wo:1, o:0, dev:sdb1
RAID1 conf printout:
 --- wd:1 rd:2
 disk 0, wo:0, o:1, dev:sda1
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x4050002 action 0xe frozen
ata2: SError: { RecovComm PHYRdyChg CommWake DevExch }
ata2.00: cmd ca/00:08:f2:a3:2b/00:00:00:00:00/ee tag 0 dma 4096 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x14 (ATA bus error)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 300)
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 300)
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 300)
ata2.00: disabled
sd 1:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 1:0:0:0: [sdb] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
        00 00 00 00
sd 1:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sdb, sector 237741042
raid1: Disk failure on sdb3, disabling device.
raid1: Operation continuing on 1 devices.
sd 1:0:0:0: rejecting I/O to offline device
ata2: EH complete
ata2.00: detaching (SCSI 1:0:0:0)
sd 1:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
end_request: I/O error, dev sdb, sector 237735314
end_request: I/O error, dev sdb, sector 1462991105
md: super_written gets error=-5, uptodate=0
raid1: Disk failure on sdb4, disabling device.
raid1: Operation continuing on 1 devices.
raid1: sdb4: rescheduling sector 1116280
RAID1 conf printout:
 --- wd:1 rd:2
 disk 0, wo:0, o:1, dev:sda3
 disk 1, wo:1, o:0, dev:sdb3
RAID1 conf printout:
 --- wd:1 rd:2
 disk 0, wo:0, o:1, dev:sda4
 disk 1, wo:1, o:0, dev:sdb4
RAID1 conf printout:
 --- wd:1 rd:2
 disk 0, wo:0, o:1, dev:sda3
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
sd 1:0:0:0: [sdb] Stopping disk
sd 1:0:0:0: [sdb] START_STOP FAILED
sd 1:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
RAID1 conf printout:
 --- wd:1 rd:2
 disk 0, wo:0, o:1, dev:sda4
raid1: sda4: redirecting sector 1116280 to another mirror

-- 
Petr Baláš - petr at balas dot cz