Re: Motherboard s 12V napájením a řešení výpadku

Martin Vancl tux.martin na gmail.com
Sobota Srpen 25 15:32:39 CEST 2012


Dne 25. srpna 2012 15:24 Petr Stehlik <petr.stehlik na atlas.cz> napsal(a):
> Jen bych chtěl upozornit že napětí "olověného" akumulátoru kolísá cca  10 až
> 15 .
> Tak a by byla schopna deska v tomto rozsahu pracovat!
> Ja mam desku na 12V a ty musi byt max +/-  1 V jinak deska nejede
> Petr.

Moje Intel deska by mela zvladat 8V az 19V:

"External Power Supply – the board can be powered with an 8 - 19 VDC
external power supply though the DC jack on the back panel.  This
connector accepts dualbarrel plugs with an inner diameter (ID) of 2.5
mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +8
(±10%) through +19 (±10%) VDC and the shell is GND.  The maximum
current rating for this connector is 8 A.
   DC input: +8 (±10%) through +19 (±10%) VDC"

Strana 58 - http://downloadmirror.intel.com/20714/eng/DN2800MT_TechProdSpec04.pdf

Nevim, co se stane, kdyz se napeti bude postupne zmensovat.
Pravdepodobne ale nic.


-- 
S pozdravem
Martin Vancl

e-mail:  tux.martin na gmail.com
jabber:  tux.martin na gmail.com
www:    http://martin.vancl.eu/


Další informace o konferenci Linux