Linux version 2.6.22.9-91.fc7 (kojibuilder@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu Sep 27 23:10:59 EDT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffec000 (usable) BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data) BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 131052) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 131052 HighMem 131052 -> 131052 early_node_map[1] active PFN ranges 0: 0 -> 131052 On node 0 totalpages: 131052 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 991 pages used for memmap Normal zone: 125965 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI 2.3 present. Using APIC driver default ACPI: RSDP 000F5670, 0014 (r0 ASUS ) ACPI: RSDT 1FFEC000, 0030 (r1 ASUS P4T533 42302E31 MSFT 31313031) ACPI: FACP 1FFEC0C0, 0074 (r1 ASUS P4T533 42302E31 MSFT 31313031) ACPI: DSDT 1FFEC134, 27EE (r1 ASUS P4T533 1000 MSFT 100000B) ACPI: FACS 1FFFF000, 0040 ACPI: BOOT 1FFEC030, 0028 (r1 ASUS P4T533 42302E31 MSFT 31313031) ACPI: APIC 1FFEC058, 005A (r1 ASUS P4T533 42302E31 MSFT 31313031) ACPI: PM-Timer IO Port: 0xe408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) Built 1 zonelists. Total pages: 130029 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0791000 soft=c0771000 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 2405.595 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 511184k/524208k available (2108k kernel code, 12376k reserved, 1112k data, 260k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) lowmem : 0xc0000000 - 0xdffec000 ( 511 MB) .init : 0xc072b000 - 0xc076c000 ( 260 kB) .data : 0xc060f3a8 - 0xc0725504 (1112 kB) .text : 0xc0400000 - 0xc060f3a8 (2108 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 4813.44 BogoMIPS (lpj=2406722) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed ACPI: Core revision 20070126 CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07 Total of 1 processors activated (4813.44 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=1536 bytes Time: 9:30:18 Date: 10/01/07 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf1220, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Enabled i801 SMBus device PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region ec00-ec3f claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved pnp: 00:00: iomem range 0x100000-0x1fffffff could not be reserved pnp: 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved pnp: 00:02: ioport range 0xe400-0xe47f has been reserved pnp: 00:02: ioport range 0xe800-0xe81f could not be reserved pnp: 00:02: ioport range 0xec00-0xec3f has been reserved pnp: 00:02: ioport range 0x4d6-0x4d6 has been reserved pnp: 00:02: iomem range 0xfff80000-0xffffffff could not be reserved pnp: 00:02: iomem range 0xffb80000-0xffbfffff has been reserved pnp: 00:0d: ioport range 0x3f0-0x3f1 has been reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: d6000000-d7dfffff PREFETCH window: d7f00000-dfffffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: d4000000-d5ffffff PREFETCH window: d7e00000-d7efffff PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 196608 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3495k freed Simple Boot Flag at 0x3a set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1191231018.482:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 1C0E7986B75803D3 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Invalid PBLK length [5] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel i850 Chipset. agpgart: AGP aperture is 256M @ 0xe0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 11:528:524 Freeing unused kernel memory: 260k freed Write protecting the kernel read-only data: 858k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: UHCI Host Controller uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: irq 16, io base 0x0000b400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: UHCI Host Controller uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1f.4: irq 17, io base 0x0000b000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 17 ohci_hcd 0000:02:0b.0: OHCI Host Controller ohci_hcd 0000:02:0b.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:02:0b.0: irq 17, io mem 0xd5800000 usb 1-2: new low speed USB device using uhci_hcd and address 2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected input: ImExPS/2 Logitech Wheel Mouse as /class/input/input2 usb 1-2: configuration #1 chosen from 1 choice ACPI: PCI Interrupt 0000:02:0b.1[B] -> GSI 20 (level, low) -> IRQ 18 ohci_hcd 0000:02:0b.1: OHCI Host Controller ohci_hcd 0000:02:0b.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:02:0b.1: irq 18, io mem 0xd5000000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:02:0b.2[C] -> GSI 21 (level, low) -> IRQ 19 ehci_hcd 0000:02:0b.2: EHCI Host Controller ehci_hcd 0000:02:0b.2: new USB bus registered, assigned bus number 5 ehci_hcd 0000:02:0b.2: irq 19, io mem 0xd4800000 ehci_hcd 0000:02:0b.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 5 ports detected SCSI subsystem initialized libata version 2.21 loaded. ata_piix 0000:00:1f.1: version 2.11 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001b800 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001b808 irq 15 hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS RS 500 FW:30.j5.I USB FW:j5] on usb-0000:00:1f.2-2 ata1.00: ATA-6: ST380011A, 3.06, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 ata1.01: ATA-6: ST380011A, 3.04, max UDMA/100 ata1.01: 156301488 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/100 usb 5-3: new high speed USB device using ehci_hcd and address 2 usb 5-3: configuration #1 chosen from 1 choice hub 5-3:1.0: USB hub found hub 5-3:1.0: 1 port detected ata2.00: ATAPI: TOSHIBA DVD-ROM SD-M1712, 1004, max UDMA/33 usb 5-3.1: new high speed USB device using ehci_hcd and address 3 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA ST380011A 3.06 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk scsi 0:0:1:0: Direct-Access ATA ST380011A 3.04 PQ: 0 ANSI: 5 sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:1:0: [sdb] Write Protect is off sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:1:0: [sdb] Write Protect is off sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 0:0:1:0: [sdb] Attached SCSI disk scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1712 1004 PQ: 0 ANSI: 5 usb 5-3.1: configuration #1 chosen from 1 choice device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1191231026.784:2): selinux=0 auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:1:0: Attached scsi generic sg1 type 0 scsi 1:0:0:0: Attached scsi generic sg2 type 5 intel_rng: FWH not detected iTCO_vendor_support: vendor-support=0 sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20 Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 18 3c59x: Donald Becker and others. 0000:02:0c.0: 3Com PCI 3c905C Tornado at e087c000. nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21 NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9639 Mon Apr 16 20:20:06 PDT 2007 ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 21 (level, low) -> IRQ 19 NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 floppy0: no floppy controllers found usb-storage: device scan complete scsi 2:0:0:0: Direct-Access Corsair Flash Voyager 1.00 PQ: 0 ANSI: 0 CCS sd 2:0:0:0: [sdc] 2002944 512-byte hardware sectors (1026 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 26 00 00 sd 2:0:0:0: [sdc] Assuming drive cache: write through sd 2:0:0:0: [sdc] 2002944 512-byte hardware sectors (1026 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 26 00 00 sd 2:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 2:0:0:0: [sdc] Attached SCSI removable disk sd 2:0:0:0: Attached scsi generic sg3 type 0 No dock devices found. input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.8) Adding 1048568k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1048568k