ATI Xpression

[Simonik Ivan]

Zdravim vsechny!

Stal jsem se stastnym (zatim) majitelem karty ATI Xpression s cipem
ATI88800GX  (1MB). Ovsem, mam problemy s akcelerovanym Xserverem
Mach64. Cele se to ma takto:

mam (zatim) monochrom VGA, ktery zvlada pouze 640x480. Ve Windowsech v 
pohode karta chodi 640x480 v 65k barve, ale Xserver zlobi. Obraz se 
protahne "nad a pod" monitor - zkratka 640x480 tam je, ale synchronizace 
je nekde mimo misu. Pokud pouziji SVGA server, nabehne to v poradku
a obraz je na monitoru. Ani v 8bpp to neni OK. Sice bych to mohl se SVGA 
serverem vydrzet do noveho monitoru, ale stejne by me to zajimalo, kde je 
bug.

Pro Ty, kteri do toho vidi vice nez ja, pripojuji vypis z Xserveru (ja 
jsem z toho moc nevykoukal).

				Diky vsem  Ivan


-------------------------------------------
XFree86 Version 3.1.2 / X Window System
(protocol Version 11, revision 0, vendor release 6000)
Operating System: Linux 
Configured drivers:
  Mach64: accelerated server for ATI Mach64 graphics adaptors (Patchlevel 0)
(using VT number 7)

XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) Mouse: type: MouseSystems, device: /dev/mouse, baudrate: 1200
(**) Mach64: Graphics device ID: "ATI Xpression"
(**) Mach64: Monitor ID: "Supercom"
(--) Mach64: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
(--) Mach64: Mode "1024x768" needs hsync freq of 35.52 kHz. Deleted.
(--) Mach64: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) Mach64: card type: VESA LocalBus
Warning: Clocks being read from the video card's BIOS,
  and the clocks lines in XF86Config file are ignored
  (see man page or README.Mach64 for more details).
(--) Mach64: Clock type: CH8398
(--) Mach64: Number of Clocks: 32
(--) Mach64: clocks:  25.18  28.32  31.50  36.00  40.00  44.90  49.50  50.00
(--) Mach64: clocks:   0.00 110.00 126.00 135.00   0.00  80.00  75.00  65.00
(--) Mach64: clocks:  12.59  14.16  15.75  18.00  20.00  22.45  24.75  25.00
(--) Mach64: clocks:   0.00  55.00  63.00  67.50   0.00  40.00  37.50  32.50
(--) Mach64: Maximum allowed dot-clock: 135.000 MHz
(**) Mach64: Mode "640x480": mode clock =  25.175, clock used =  25.180
(--) Mach64: There is no mode definition named "800x600"
(--) Mach64: Removing mode "800x600" from list of valid modes.
(--) Mach64: There is no mode definition named "1024x768"
(--) Mach64: Removing mode "1024x768" from list of valid modes.
(**) Mach64: Virtual resolution: 1024x768
(--) Mach64: videoram: 1024k
(--) Mach64: Using hardware cursor
(--) Mach64: Using 4 MB aperture
(--) Mach64: Ramdac is CH8398
(--) Mach64: Using 6 bits per RGB value
(--) Mach64: Aperture mapped to 0x4000000
(--) Mach64: Pixmap cache: 0 256x256 slots, 0 128x128 slots, 0 64x64 slots
(--) Mach64: Font cache: 0 fonts





+-------------------------------------------------------------------+
| Simonik Ivan, Ph.D. student          (TeX: \v{S}imon\'{\i}k Ivan) |
| simonik na psycho.fme.vutbr.cz    (http://www.fme.vutbr.cz/~simonik) |
+--------------------------  Address  ------------------------------+
| Technical University of Brno, Inst. of Automation and Information |
| Technology, Technicka 2, 616 69, Brno, Czech Republic             |
+ --------------------  I'm interested in  -------------------------+
| Evolutionary Computing, Rough Sets, C/C++, TeX, Linux             |
+-------------------------------------------------------------------+