Nefunkcni port lp0

[Dzon]

Vytah z Printing-HOWTO:

  3.1.  The lp device

  The Linux kernel (<=2.1.32), assuming you have compiled in or loaded
  the lp device (the output of cat /proc/devices should include the
  device lp), provides one or more of /dev/lp0, /dev/lp1, and /dev/lp2.
  These are NOT assigned dynamically, rather, each corresponds to a
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
  specific hardware I/O address.  This means that your first printer may
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  be lp0 or lp1 depending on your hardware.  Try both ;)



-- 

				  -Dzon
                             dzon na writeme.com