Nefunkcni port lp0
Miroslav BENES
mbenes na tenez.cz
Pátek Srpen 13 10:45:06 CEST 1999
> Vytah z Printing-HOWTO:
>
> 3.1. The lp device
>
> The Linux kernel (<=2.1.32), assuming you have compiled in or loaded
> the lp device (the output of cat /proc/devices should include the
> device lp), provides one or more of /dev/lp0, /dev/lp1, and /dev/lp2.
> These are NOT assigned dynamically, rather, each corresponds to a
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> specific hardware I/O address. This means that your first printer may
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> be lp0 or lp1 depending on your hardware. Try both ;)
Vytah z tisku VariCAD -> plotter na "jedinem" paralelnim portu
(mainboard PII, port je na 0x378) :
cat * >/dev/lp0
P.S. Mam dojem, ze mezi kernely 2.0.x a 2.2.x je v tomhle rozdil.
P.P.S. V kombinaci s pristupovymi pravy k /dev/lp0 mi to zabralo
trochu casu a experimentovani, ale povedlo se.
--------------------------
Miroslav BENES
E-mail : mbenes na tenez.cz
TENEZ Chotebor, a.s
--------------------------
Další informace o konferenci Linux