problem s DOSEMU
David Haring
dave na ibp.cz
Pátek Leden 15 11:33:54 CET 1999
Peter Cernoch wrote:
> Preji vsem hezky den,
>
> po trose usili se mi podarilo rozbehat dosemu (0.98.1-2, rpm) tak abych
> mohl
> startovat DOS z diskety (MSDOS 6.22).
> Neumim vsak zviditelnit disk C: (mountovany jako vfat do adr. /dosc)
> a nefunguje mi grafika (karta S3 Trio 64V+PCI, VESA DDC).
>
Zdravim,
mam zde taktez kartu s Trio64V+ rev. 53
v dosemu.conf je treba uvest jako chipset s3:
$_video = "vga" # one of: plainvga, vga, ega, mda, mga, cga
$_console = (1) # use 'console' video
$_graphics = (1) # use the cards BIOS to set graphics
$_videoportaccess = (1) # allow videoportaccess when 'graphics' enabled
$_vbios_seg = (0xc000) # set the address of your VBIOS (e.g. 0xe000)
$_vbios_size = (0x10000)# set the size of your BIOS (e.g. 0x8000)
$_vmemsize = (2048) # size of regen buffer
$_chipset = "s3" # one of: plainvga, trident, et4000, diamond, avance
# cirrus, matrox, wdvga, paradise
$_dualmon = (0) # if you have one vga _plus_ one hgc (2 monitors)
pro pristup k adresarum pres linux FS lze pouzit lredir nebo emufs:
1) pro emufs muzete dat do config.sys napr. toto:
device=emufs.sys /dosc
2) pro lredir muzete dat do autoexec.bat treba toto:
LREDIR c: LINUX\FS\/dosc
s pozdravem,
--
David Haring
Další informace o konferenci Linux