X a kernel 2.2.1

[Jakub Holcman]

Dobre raanko,
  nemam jeste prilis mnoho zkusenosti, ale snazil jsem se zkompilovat
nove jadro. Po mnoha pokusech jsem se dobral castecneho uspechu ... vse
funguje az na X. Puvodni jadro bylo 2.0.35. (S tim to stale jeste
funguje) Nevi nekdo v cem by mohl byt problem?.
Diky Jakub.
Zde je vypis X ...
-----------------------------------------------------------
_XSERVTransSocketOpen: socket() failed for local
_XSERVTransSocketOpenCOTSServer: Unable to open socket for local
_XSERVTransOpen: transport open failed for local/linserver:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for local

XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
 If the server is older than 6-12 months, or if your card is newer
 than the above date, look for a newer version before reporting
 problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.34 i686 [ELF]
Configured drivers:
  S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
      newmmio, mmio_928, s3_generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: Auto, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3
(**) S3: Graphics device ID: "Trio64UV+"
(**) S3: Monitor ID: "My Monitor"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"

(--) S3: PCI: Trio64UV+ rev 52, Linear FB @ 0xe0000000
(--) S3: chipset:   Trio64UV+ rev. 52
(--) S3: chipset driver: mmio_928
(--) S3: card type: PCI
(--) S3: videoram:  2048k
(--) S3: Ramdac type: s3_trio64
(--) S3: Ramdac speed: 135 MHz
(--) S3: Using Trio32/64 programmable clock (MCLK 66.222 MHz)
(--) S3: Maximum allowed dot-clock: 80.000 MHz
(**) S3: Mode "1024x768": mode clock =  75.000
(**) S3: Using 16 bpp.  Color weight: 565
(**) S3: Virtual resolution set to 1024x768
(--) S3: Local bus LAW is 0xE0000000
(--) S3: Using a banksize of 2048k, line width of 1024
_X11TransSocketOpen: socket() failed for local
_X11TransSocketOpenCOTSClient: Unable to open socket for local
_X11TransOpen: transport open failed for local/linserver:0

waiting for X server to begin accepting connections (--) S3: Using a
single 64x64 area at (960,769) for expanding pixmaps
(--) S3: Using 16 planes of 960x255 at (0,769) aligned 8 as font cache
.Mouse: PnP ID string: '(!DKYE0003\\MOUSE\PNP0F0A\NETMOUSE40)'
Mouse: PnP rev 1.00
Mouse: protocol: 9
_X11TransSocketOpen: socket() failed for local
_X11TransSocketOpenCOTSClient: Unable to open socket for local
_X11TransOpen: transport open failed for local/linserver:0
..
_X11TransSocketOpen: socket() failed for local
_X11TransSocketOpenCOTSClient: Unable to open socket for local
_X11TransOpen: transport open failed for local/linserver:0
..