pppd - IPCP nedorozumeni (long)

[Jan Snajdr]

Dlouho a marne se snazim donutit pppd (2.3.5, 2.3.6) , aby se pripojil k
memu ISP,
jak to s uspechem provadeji windows95.

Spojeni a autentizace (CHAP) probehnou bez problemu, ten nastava
pri predavani IP adres. V logu to vypada takto :
--- cut ---
rcvd [CHAP Success id=0xe3 ""]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
rcvd [IPCP ConfReq id=0x75 <addr 0.0.0.0>]
sent [IPCP ConfRej id=0x75 <addr 0.0.0.0>]
rcvd [IPCP ConfNak id=0x1 <addr 194.228.129.41>]
sent [IPCP ConfReq id=0x2 <addr 194.228.129.41>]
rcvd [IPCP ConfReq id=0x76]
sent [IPCP ConfAck id=0x76]
rcvd [IPCP ConfAck id=0x2 <addr 194.228.129.41>]
Could not determine remote IP address
sent [IPCP TermReq id=0x3 "Could not determine remote IP address"]
rcvd [IPCP TermAck id=0x3]
sent [LCP TermReq id=0x2 "No network protocols running"]
rcvd [LCP TermAck id=0x2]
Connection terminated.
Failed
--- cut ---
Server (Cisco AS) proste vtipkuje. Technicka podpora mi
ani po delsi komunikaci nepomohla, zjevne se v Linuxu
neorientuje a jak 'sem se dozvedel, nema tu potrebu.
(Mozna uz vite, ze se jedna o IOL, C.Budejovice).
Zajimave je, ze (min.) prazsky server se chova spravne.
Takze to vypada, ze me nuti
 a) pripojovat se do Prahy (3.pasmo, zajasa Telecom)
 b) odeprit Linuxu Internet (zaraduje se M$)
 c) vloupat se do cisca a "opravit" ho
 d) rozebrat podle RFC raw zaznam spojeni z win. a upravit si pppd

Nejsnazsi se mi coby beznemu uzivateli zda var. d).
Zajimalo by me tedy, jestli existuje jednodussi reseni nebo
podobny hack. Predem diky za odezvy.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Jan Snajdr ~~~