prepnuti z 10 Mbs na 100 Mbs -delsi
Radek kohout
Radek.Kohout na op-profashion.cz
Sobota Listopad 20 13:15:41 CET 1999
Preji prijemny den
Mam v pocitaci sitovku 3c905 B - boomerang, ktera funguje dobre na 10 Mb
/proc/pci :
Ethernet controller: 3Com 3C905 100bTX (rev 0).
Medium devsel. IRQ 10. Master Capable. Latency=64. Min Gnt=3.Max
Lat=8.
I/O at 0xef00.
/etc/conf.modules :
alias eth0 3c59x
/var/log/messages :
3c59x.c:v0.99E 5/12/98 Donald Becker http://cesdis.gsfc.nasa.gov/l
inux/drivers/vortex.html
eth0: 3Com 3c905 Boomerang 100baseTx at 0xef00, 00:60:08:5f:a7:c8,
IRQ 10
8K word-wide RAM 3:5 Rx:Tx split, autoselect/NWay Autonegotiatio
n interface.
MII transceiver found at address 24, status 7869.
Enabling bus-master transmits and whole-frame receives.
Chtel jsem zmenit rychlost na 100 Mb ( treba Half Duplex).
Zmenil jsem
/etc/conf.modules :
alias eth0 3c59x
options 3c59x options=4
zmenil jsem rychlost na portu switche na 100 Mb, Half Duplex
restart systemu
/var/log/messages :
3c59x.c:v0.99E 5/12/98 Donald Becker http://cesdis.gsfc.nasa.gov/l
inux/drivers/vortex.html
eth0: 3Com 3c905 Boomerang 100baseTx at 0xef00, 00:60:08:5f:a7:c8,
IRQ 10
8K word-wide RAM 3:5 Rx:Tx split, autoselect/NWay Autonegotiatio
n interface.
Media override to transceiver type 4 (100baseTX).
Enabling bus-master transmits and whole-frame receives.
Link na portu naskoci, ale nekomunikuje.
netusi nekdo, kde je chyba ?
Radek Kohout
Radek.Kohout na op-profashion.cz
0508/ 311 705
Další informace o konferenci Linux