Jeste jednou CD-RW a mazani

[Adam Pribyl]

Protoze vsichni odpovedeli, na to jak a jesli jde vypalit DAO na ATAPI CD
mechanice, ale ne na to co s tim ze nejde smazat CD-RW, ptam se jeste
jednou: taktez mi nejde smazat CD-RW disk. Jak na to? Pripojuji
vserikajici vypis:

-------------------------------------------------------------------------
Cdrecord 1.8.1 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Using libscg version 'schily-0.1'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'ATAPI   '
Identifikation : 'CD-R/RW 4X4X32  '
Revision       : '3.ER'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Drive buf size : 374784 = 366 KB
CDB:  1B 00 00 00 01 00
Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 44 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x44 Qual 0x00 (internal target failure) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s
CDB:  1B 00 00 00 01 00
Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 44 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x44 Qual 0x00 (internal target failure) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 40s
/usr/bin/cdrecord: Input/output error. start/stop unit: scsi
sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
/usr/bin/cdrecord: Input/output error. start/stop unit: scsi
sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
Current Secsize: 2048
  ATIP start of lead out: 335975 (74:41/50)
Blocks total: 335975 Blocks current: 248318 Blocks remaining: 248468
Starting to write CD/DVD at speed 4 in dummy mode for single session.
CDB:  A1 00 00 00 00 00 00 00 00 00 00 00
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.002s timeout 9600s
/usr/bin/cdrecord: Input/output error. blank unit: scsi sendcmd: retryable
error
status: 0x2 (CHECK CONDITION)
/usr/bin/cdrecord: Cannot blank disk, aborting.
--------------------------------------------------------------------------

A doplnuji:
Mechanika ACER, emulace SCSI pres ATAPI.

Diky za pripadne rady

Adam Pribyl