Jeste jednou CD-RW a mazani

[Uzivatel vd]

Disk je asi na 4 násobný zápis a vyžaduje větší mazací sílu.
Zkuste speed=4 (i v případě 2 rychlostní mechaniky).

DAdam Pribyl wrote:

> Protoze vsichni odpovedeli, na to jak a jesli jde vypalit DAO na ATAPI CD
> mechanice, ale ne na to co s tim ze nejde smazat CD-RW, ptam se jeste
> jednou: taktez mi nejde smazat CD-RW disk. Jak na to? Pripojuji
> vserikajici vypis:
> 
> -------------------------------------------------------------------------
> Cdrecord 1.8.1 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Using libscg version 'schily-0.1'
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 1
> Vendor_info    : 'ATAPI   '
> Identifikation : 'CD-R/RW 4X4X32  '
> Revision       : '3.ER'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags   : SWABAUDIO
> Drive buf size : 374784 = 366 KB
> CDB:  1B 00 00 00 01 00
> Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 44 00 00 00
> Sense Key: 0x4 Hardware Error, Segment 0
> Sense Code: 0x44 Qual 0x00 (internal target failure) Fru 0x0
> Sense flags: Blk 0 (not valid) 
> cmd finished after 0.001s timeout 40s
> CDB:  1B 00 00 00 01 00
> Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 44 00 00 00
> Sense Key: 0x4 Hardware Error, Segment 0
> Sense Code: 0x44 Qual 0x00 (internal target failure) Fru 0x0
> Sense flags: Blk 0 (not valid) 
> cmd finished after 0.001s timeout 40s
> /usr/bin/cdrecord: Input/output error. start/stop unit: scsi
> sendcmd: retryable error
> status: 0x2 (CHECK CONDITION)
> /usr/bin/cdrecord: Input/output error. start/stop unit: scsi
> sendcmd: retryable error
> status: 0x2 (CHECK CONDITION)
> Current Secsize: 2048
>   ATIP start of lead out: 335975 (74:41/50)
> Blocks total: 335975 Blocks current: 248318 Blocks remaining: 248468
> Starting to write CD/DVD at speed 4 in dummy mode for single session.
> CDB:  A1 00 00 00 00 00 00 00 00 00 00 00
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
> Sense flags: Blk 0 (not valid) 
> cmd finished after 0.002s timeout 9600s
> /usr/bin/cdrecord: Input/output error. blank unit: scsi sendcmd: retryable
> error
> status: 0x2 (CHECK CONDITION)
> /usr/bin/cdrecord: Cannot blank disk, aborting.
> --------------------------------------------------------------------------
> 
> A doplnuji:
> Mechanika ACER, emulace SCSI pres ATAPI.
> 
> Diky za pripadne rady
> 
> Adam Pribyl
>