Diald

[Rafael Noas]

Mate pravdu je to diald-0.99.4.
Podporu pro SLIP mam kompilovanou a tato verze umi slip nebo tap
(ethertap, take moc tomu nerozumim) ale zkousel jsem to pres slip i pres
tap a vysledek je stejny. Tady je vypis pro slip:

...
Oct 19 14:50:24 xl266 diald[731]: Creating FIFO
...
Oct 19 14:50:25 xl266 insmod: /lib/modules/2.2.14-6.0/net/ethertap.o:
insmod tap0 failed
...
Oct 19 14:50:25 xl266 insmod: /lib/modules/2.2.14-6.0/net/ethertap.o:
insmod tap15 failed
Oct 19 14:50:25 xl266 kernel: CSLIP: code copyright 1989 Regents of the
University of California
Oct 19 14:50:25 xl266 kernel: SLIP: version
0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256) (6 bit
encapsulation enabled).
Oct 19 14:50:25 xl266 kernel: SLIP linefill/keepalive option.
Oct 19 14:50:25 xl266 diald[731]: start sl0: SIOCSIFMETRIC: Operation
not supported
Oct 19 14:50:25 xl266 diald[731]: start sl0: SIOCDELRT: No such process
Oct 19 14:50:25 xl266 diald[731]: Changed snoop device to sl0
Oct 19 14:50:45 xl266 diald[731]: Calling site 127.0.0.4
Oct 19 14:50:46 xl266 chat[758]: abort on (BUSY)
Oct 19 14:50:46 xl266 chat[758]: abort on (NO CARRIER)
Oct 19 14:50:46 xl266 chat[758]: abort on (VOICE)
Oct 19 14:50:46 xl266 chat[758]: abort on (NO DIALTONE)
Oct 19 14:50:46 xl266 chat[758]: abort on (NO ANSWER)
Oct 19 14:50:46 xl266 chat[758]: send (ATZ^M)
Oct 19 14:50:46 xl266 chat[758]: expect (OK)
Oct 19 14:50:46 xl266 chat[758]: ATZ^M^M
Oct 19 14:50:46 xl266 chat[758]: OK
Oct 19 14:50:46 xl266 chat[758]:  -- got it
Oct 19 14:50:46 xl266 chat[758]: send
(ATQ0V1E1S0=0&C1&D2S11=55+FCLASS=0^M)
Oct 19 14:50:46 xl266 chat[758]: expect (OK)
Oct 19 14:50:46 xl266 chat[758]: ^M
Oct 19 14:50:47 xl266 chat[758]: ATQ0V1E1S0=0&C1&D2S11=55+FCLASS=0^M^M
Oct 19 14:50:47 xl266 chat[758]: OK
Oct 19 14:50:47 xl266 chat[758]:  -- got it
Oct 19 14:50:47 xl266 chat[758]: send (ATDT0,0971200555^M)
Oct 19 14:50:47 xl266 chat[758]: expect (CONNECT)
Oct 19 14:50:47 xl266 chat[758]: ^M
Oct 19 14:51:16 xl266 chat[758]: ATDT0,0971200555^M^M
Oct 19 14:51:16 xl266 chat[758]: CONNECT
Oct 19 14:51:16 xl266 chat[758]:  -- got it
Oct 19 14:51:16 xl266 chat[758]: send (\d)
Oct 19 14:51:17 xl266 diald[731]: Connected to site 127.0.0.4
Oct 19 14:51:17 xl266 diald[731]: Running pppd (pid = 760).
Oct 19 14:51:17 xl266 diald[760]: Running pppd: /usr/sbin/pppd
-defaultroute -detach modem crtscts mtu 1500 mru 1500 netmask
255.255.255.0 debug noauth user username
Oct 19 14:51:17 xl266 kernel: PPP: version 2.3.7 (demand dialling)
Oct 19 14:51:17 xl266 kernel: PPP line discipline registered.
Oct 19 14:51:17 xl266 kernel: registered device ppp0
Oct 19 14:51:40 xl266 diald[731]: child process 760 terminated with
signal 1
Oct 19 14:51:40 xl266 diald[731]: start sl0: SIOCSIFMETRIC: Operation
not supported
Oct 19 14:51:40 xl266 diald[731]: start sl0: SIOCADDRT: File exists
Oct 19 14:51:40 xl266 diald[731]: start sl0: SIOCDELRT: No such process
Oct 19 14:51:40 xl266 diald[731]: start sl0: SIOCADDRT: File exists
Oct 19 14:51:40 xl266 diald[731]: Disconnected. Call duration 23
seconds.
Oct 19 14:51:40 xl266 diald[731]: IP transmitted 4078 bytes and received
0 bytes.
Oct 19 14:51:41 xl266 diald[731]: Delaying 60 seconds before clear to
dial.
...


Pry ten SIO... neni zadna chyba ale pouze "konstatovani" ze tu "vec"
neumi.

Diky moc.

Rafael Noas.



-----Original Message-----
From: Jaroslav Stribrsky [mailto:Jaroslav.Stribrsky na vscht.cz]
Sent: Friday, October 20, 2000 1:51 PM
To: linux na linux.cz
Subject: Re: Diald


Teda nejsem si jisty - tohle vypada jako diald-0.99. ja jsem si hral
vzdycky
jen s diald-0.16, ale mate zakompilovanou podporu pro SLIP ? Diald 0.16
vyzadoval zarizeni sl0, na ktery se vzdycky povesil a presmeroval na nej
default routu. Podle tech hlasek v logu mi prijde, ze diald se pokousi
inicializovat zarizeni tap0 (vubec nevim co je ?) a to se mu rozumne
nepodari.
Nemuze bejt pes zakopanej nekde tady ? Pak podle me totiz diald zjisti,
ze
zadny data netecou, nema co posilat a tak zavesi ...
Z logu jsem vyseknul jen tu cast se starterm diald, podle me ty
SIGCHILDy a
operation not supported budou ty duvodu, proc to nefunguje.


   Jarda