SNMP & MRTG

[Lukas mALY]

Omlouvam se ze jsem otravoval, uz to chodi !!!

-- 
bye

Lukas Maly von Koniginhof an der Elbe

 malyl na pluto.spsselib.hiedu.cz
  http://www.spsselib.hiedu.cz/~malyl
   http://www.smejdil.cz
    mobil: 0604-556168
     uin: 4126317

On Fri, 27 Apr 2001, Lukas mALY wrote:

> Dobry den
>
> Tento dotaz tu jiz nekolukrat zaznel.  Procital jsem si nejake prizpecky z
> archyvu, ale to co jsem potreboval jsem tam nenasel. Zkousel jsem si z
> provoznit MRTG a co je jeho samotneho tyce, tak funguje bez problemu, ale
> zatim jen tak, ze zjistuje informace z okolnich routeru (stanic).
>
> Problem mam v tom, ze na serveru, na kterem bezi se mi nedari nastavit
> snmpd tak aby toto zarizeni poskytovalo potrebne informace. Kdyz zadam:
>
> [root na tova /root]# cfgmaker public na 212.71.140.242
> --base: Get Device Info on public na 212.71.140.242
> --base: Vendor Id:
> --base: Populating confcache
> SNMP Error:
> Received SNMP response with error code
>   error status: noSuchName
>   index 1 (OID: 1.3.6.1.2.1.2.2.1.2)
> SNMPv1_Session (remote host: "212.71.140.242" [212.71.140.242].161)
>                   community: "public"
>                  request ID: 74141864
>                 PDU bufsize: 8000 bytes
>                     timeout: 2s
>                     retries: 5
>                     backoff: 1)
> SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.2 on public na 212.71.140.242
> SNMP Error:
>
> Nevim presne co ma byt obsahem snmpd.conf stavajici nastaveni mam takto:
>
> #       sec.name  source          community
> com2sec tova  default       public
>
> ####
> # Second, map the security name into a group name:
>
> #       groupName      securityModel securityName
> group   tovaGroup v1           tova
> group   tovaGroup v2c          tova
>
> ####
> # Third, create a view for us to let the group have rights to:
>
> #       name           incl/excl     subtree         mask(optional)
> view    systemview     included      system
>
> ####
> # Finally, grant the group read-only access to the systemview view.
>
> #       group          context sec.model sec.level prefix read   write
> notif
>  access  tovaGroup ""      any       noauth    exact  systemview none none
>
> Jednoduse receno nevim co je treba nastavit v SNMP aby MRTG ziskalo
> informace o zarizeni.
>
> Dik za jakoukoliv radu
>
>