shaper doplneni...

[Tomas Riha]

> Dobry den, tady je jeste nastaveni...
> 
> problem:
> 
> mohu pingnout v naznacenem smeru pouze na rozhrani shaper1 a eth0
> pocitace B. dal se nedostanu.
> 
> nevite nekdo co by mohlo byt spatne?
> A jeste jeden dotaz, jsou nejake problemy shaper + maskarada?
> 
> schema:
> 
>    |   pocitac A   |       |    pocitac B  |
> --->>|eth0....shaper1|----->>|eth0.......eth1|-------->>
>    |               |       |               |
>    |    192.168.2.2|       |192.168.2.1    |
> 
> 
> postup:
> 
> /sbin/insmod -o shaper /lib/modules/2.2.15/net/shaper.o
> /sbin/insmod -o shaper1 /lib/modules/2.2.15/net/shaper.o
> 
> /sbin/shapecfg attach shaper1 eth1
> /sbin/shapecfg speed shaper1 32000
> /sbin/ifconfig shaper1 192.168.2.2 netmask 255.255.255.0 up
> /sbin/route add default gw 192.168.2.1 dev shaper1
> 
> route -n:
> 
> 0.0.0.0  192.168.100.1   255.255.255.252 UG    0    0    0 eth1
> 0.0.0.0  192.168.100.1   255.255.255.252 UG    2    0    0 shaper1
> 172.16.100.0   0.0.0.0         255.255.255.0   U     0    0    0 eth1
> 192.168.2.0   0.0.0.0         255.255.255.0   U     0    0    0 eth1
> 192.168.2.0   0.0.0.0         255.255.255.0   U     0    0    0 shaper1

0.0.0.0  192.168.2.1   0.0.0.0 UG    0    0    0 eth1
0.0.0.0  192.168.2.1   0.0.0.0 UG    2    0    0 shaper1
172.16.100.0   0.0.0.0   255.255.255.0   U     0    0    0 eth0
192.168.2.0   0.0.0.0    255.255.255.0   U     0    0    0 eth1
192.168.2.0   0.0.0.0    255.255.255.0   U     0    0    0 shaper1

samozrejme takto :(
> 
> 
> tomas
> 
>