Re: Nelze zapnout DMA - VIA KT133 (douhé - beginner)
Aleš Tošovský
ales.tosovsky na worldonline.cz
Neděle Březen 18 22:33:03 CET 2001
Jak vidím, přílohy nedošly (asi odfiltrovány),
takže tady jsou :
==================dmesg==================
Linux version 2.4.2 (root na HomePC) (gcc version 2.96 20000731 (Red Hat Linux 7.0)) #1 Ne bře 18 16:43:08 CET 2001
BIOS-provided physical RAM map:
BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable)
BIOS-e820: 0000000000000400 @ 000000000009fc00 (usable)
BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved)
BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved)
BIOS-e820: 0000000007ef0000 @ 0000000000100000 (usable)
BIOS-e820: 000000000000d000 @ 0000000007ff3000 (ACPI data)
BIOS-e820: 0000000000003000 @ 0000000007ff0000 (ACPI NVS)
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
Scan SMP from c0000000 for 4096 bytes.
On node 0 totalpages: 32752
zone(0): 4096 pages.
zone(1): 28656 pages.
zone(2): 0 pages.
mapped APIC to ffffe000 (01222000)
Kernel command line: BOOT_IMAGE=linux ro root=303 BOOT_FILE=/boot/bzImage-2.4.2-new2 3
Initializing CPU#0
Detected 700.052 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1395.91 BogoMIPS
Memory: 126796k/131008k available (886k kernel code, 3824k reserved, 341k data, 188k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: AMD Duron(tm) Processor stepping 00
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb430, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
isapnp: Scanning for Pnp cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
block: queued sectors max/low 84218kB/28072kB, 256 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST320414A, ATA DISK drive
hdc: WDC AC32100H, ATA DISK drive
hdd: CD-540E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2434/255/63, UDMA(66)
hdc: 4124736 sectors (2112 MB) w/128KiB Cache, CHS=4092/16/63, DMA
Partition check:
hda: hda1 hda2 < hda5 > hda3 hda4
hdc: [PTBL] [1023/64/63] hdc1 hdc2
Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: unsupported bridge
agpgart: no supported devices found.
usb.c: registered new driver hub
PCI: Found IRQ 12 for device 00:07.2
PCI: The same IRQ used for device 00:07.3
PCI: The same IRQ used for device 00:08.0
uhci.c: USB UHCI at I/O 0xe400, IRQ 12
uhci.c: detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 12 for device 00:07.3
PCI: The same IRQ used for device 00:07.2
PCI: The same IRQ used for device 00:08.0
uhci.c: USB UHCI at I/O 0xe800, IRQ 12
uhci.c: detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 188k freed
uhci.c: root-hub INT complete: port1: 48a port2: 48a data: 6
uhci.c: root-hub INT complete: port1: 48a port2: 48a data: 6
uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
uhci.c: root-hub INT complete: port1: 488 port2: 488 data: 6
Adding Swap: 136544k swap-space (priority -1)
es1371: version v0.27 time 16:53:21 Mar 18 2001
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x06
PCI: Found IRQ 10 for device 00:0f.0
es1371: found es1371 rev 6 at io 0xec00 irq 10
es1371: features: joystick 0x0
ac97_codec: AC97 codec, id: 0x5452:0x4123 (TriTech TR?????)
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
MSDOS FS: Using codepage 852
MSDOS FS: IO charset iso8859-2
==================dmesg==================
==================via==================
----------VIA BusMastering IDE Configuration----------------
Driver Version: 3.20
South Bridge: VIA vt82c686a
Revision: ISA 0x22 IDE 0x10
BM-DMA base: 0xe000
PCI clock: 33MHz
Master Read Cycle IRDY: 0ws
Master Write Cycle IRDY: 0ws
BM IDE Status Register Read Retry: yes
Max DRDY Pulse Width: No limit
-----------------------Primary IDE-------Secondary IDE------
Read DMA FIFO flush: yes yes
End Sector FIFO flush: no no
Prefetch Buffer: no no
Post Write Buffer: no no
Enabled: yes yes
Simplex only: no no
Cable Type: 80w 40w
-------------------drive0----drive1----drive2----drive3-----
Transfer Mode: PIO PIO DMA PIO
Address Setup: 30ns 120ns 30ns 30ns
Cmd Active: 90ns 90ns 90ns 90ns
Cmd Recovery: 30ns 30ns 30ns 30ns
Data Active: 90ns 330ns 90ns 90ns
Data Recovery: 30ns 270ns 30ns 30ns
Cycle Time: 30ns 600ns 120ns 120ns
Transfer Rate: 66.0MB/s 3.3MB/s 16.5MB/s 16.5MB/s
==================via==================
==================seatool==================
Copyright (c) 2000 by Seagate Technology, Inc. All rights reserved.
Timer Resolution: 0.000122
Short Test Begin: 17-Mar-2001 18:19:31
Cable Test - Passed
Buffer Test - Passed
Identify Data
Model Number: ST320414A
Serial Number: 7EC08VTH
Firmware Revision: 3.05
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 39102336 Sectors
80 Conductor Cable Reported
ID Method: Unknown
SMART Check: Passed
DST - Passed
PIO/DMA Data Compare
Total Bytes = 22884352
Estimated PIO Transfer Rates
Min: 0.99MB/s Max: 2.54MB/s Avg: 2.52MB/s
Estimated DMA Transfer Rates
Min: 51.74MB/s Max: 77.60MB/s Avg: 53.14MB/s
SMART Check: Passed
Short Test Passed: 17-Mar-2001 18:20:24
-----------------------------------------------------------------
_ _ _
/ / (_)
_\ \ \ DIAGATA.EXE Version 3.02.1011ML
(_)_/_/
-----------------------------------------------------------------
Copyright (c) 2000 by Seagate Technology, Inc. All rights reserved.
Timer Resolution: 0.000122
Long Test Begin: 17-Mar-2001 18:21:46
Cable Test - Passed
Buffer Test - Passed
Identify Data
Model Number: ST320414A
Serial Number: 7EC08VTH
Firmware Revision: 3.05
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 39102336 Sectors
80 Conductor Cable Reported
ID Method: Unknown
SMART Check: Passed
DST - Passed
PIO/DMA Data Compare
Total Bytes = 22827520
Estimated PIO Transfer Rates
Min: 0.96MB/s Max: 2.54MB/s Avg: 2.51MB/s
Estimated DMA Transfer Rates
Min: 51.74MB/s Max: 51.74MB/s Avg: 51.74MB/s
Long Test Passed: 17-Mar-2001 18:33:49
==================seatool==================
Další informace o konferenci Linux