iomega zip

Pavel Tuma xtump04 na sorry.vse.cz
Pondělí Květen 7 14:53:53 CEST 2001


Mam problem s pripojovanim ZIp drivu ...

modrobe ppa

nenathne modul ppa ... pripojuji vypis z dmesg:

Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
Winbond chip at EFER=0x3f0 key=0x87 devid=52 devrev=f4 oldid=ff
Winbond chip type 83977EF / SMSC 97w35x
Winbond LPT Config: cr_30=01 60,61=0378 70=07 74=03, f0=03
Winbond LPT Config: active=yes, io=0x0378 irq=7, dma=3
Winbond LPT Config: irqtype=pulsed low, high-Z, ECP fifo threshold=0
Winbond LPT Config: Port mode=ECP and EPP-1.9
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 16
0x378: readIntrThreshold is 16
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x48
0x378: ECP settings irq=7 dma=<none or set by other means>
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,EPP,ECP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
SCSI subsystem driver Revision: 1.00
ppa: Version 2.07 (for Linux 2.4.x)
WARNING - no ppa compatible devices found.
  As of 31/Aug/1998 Iomega started shipping parallel
  port ZIP drives with a different interface which is
  supported by the imm (ZIP Plus) driver. If the
  cable is marked with "AutoDetect", this is what has
  happened.

pokud pripojuji druhy novejsi drive modulem imm vse je OK ..
nevite nekdo cim to muze byt ?



				--------======================-------
			        	      Pavel Tuma
				      (a.k.a. Charon / UFO / BM)
				--------======================-------




Další informace o konferenci Linux