iomega zip

[jkf]

mel jsem podobny problem zkus si modul parport_pc (kernelu CONFIG_PARPORT_PC=y)

jan

On Mon, 7 May 2001 14:53:53 +0200
Pavel Tuma <xtump04 na sorry.vse.cz> wrote:

> 
> Mam problem s pripojovanim ZIp drivu ...
> 
> modrobe ppa
> 
> nenathne modul ppa ... pripojuji vypis z dmesg:
> 
> Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
> Winbond chip at EFER=0x3f0 key=0x87 devid=52 devrev=f4 oldid=ff
> Winbond chip type 83977EF / SMSC 97w35x
> Winbond LPT Config: cr_30=01 60,61=0378 70=07 74=03, f0=03
> Winbond LPT Config: active=yes, io=0x0378 irq=7, dma=3
> Winbond LPT Config: irqtype=pulsed low, high-Z, ECP fifo threshold=0
> Winbond LPT Config: Port mode=ECP and EPP-1.9
> SMSC Super-IO detection, now testing Ports 2F0, 370 ...
> 0x378: FIFO is 16 bytes
> 0x378: writeIntrThreshold is 16
> 0x378: readIntrThreshold is 16
> 0x378: PWord is 8 bits
> 0x378: Interrupts are ISA-Pulses
> 0x378: ECP port cfgA=0x10 cfgB=0x48
> 0x378: ECP settings irq=7 dma=<none or set by other means>
> parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,EPP,ECP]
> parport0: irq 7 detected
> parport0: cpp_daisy: aa5500ff(38)
> parport0: assign_addrs: aa5500ff(38)
> parport0: cpp_daisy: aa5500ff(38)
> parport0: assign_addrs: aa5500ff(38)
> SCSI subsystem driver Revision: 1.00
> ppa: Version 2.07 (for Linux 2.4.x)
> WARNING - no ppa compatible devices found.
>   As of 31/Aug/1998 Iomega started shipping parallel
>   port ZIP drives with a different interface which is
>   supported by the imm (ZIP Plus) driver. If the
>   cable is marked with "AutoDetect", this is what has
>   happened.
> 
> pokud pripojuji druhy novejsi drive modulem imm vse je OK ..
> nevite nekdo cim to muze byt ?
> 
> 
> 
> 				--------======================-------
> 			        	      Pavel Tuma
> 				      (a.k.a. Charon / UFO / BM)
> 				--------======================-------
> 
>