isdn teles16.3c
marek cervenka
cer20um na axpsu.fpf.slu.cz
Neděle Říjen 14 21:09:33 CEST 2001
dobry vecer,
mel bych maly dotaz ohledne provozu isdn karty teles
nedari se mne ji sprovoznit jak pod 2.2.19, tak pod 2.4.2-2(RH)
io a irq jsem nastavoval zarucene nepouzite
karty mam dve stejne a obe se chovaji stejne (ze 100% funguji ovsem
bohuzel nevim)
ma nekdo s touto kartou pozitivnejsi zkusenosti?
vypisy z RH7.1/2.4.2-2
--/proc/isapnp
Card 1 'TAG2620:TELES.S0/16.3c Plug&Play' PnP version 1.0 Product version 2.1
Logical device 0 'TAG2620:Unknown'
Supported registers 0x2
Device is active
Active port 0x100
Active IRQ 10
Resources 0
Priority preferred
Port 0x100-0xffe, align 0x1, size 0x2, 16-bit address decoding
IRQ 3,5,2/9,10,11,12,15 High-Edge
--dmesg
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 2.41.6.2
HiSax: Layer2 Revision 2.25.6.1
HiSax: TeiMgr Revision 2.17.6.1
HiSax: Layer3 Revision 2.17.6.2
HiSax: LinkLayer Revision 2.51.6.1
HiSax: Approval certification failed because of
HiSax: unauthorized source code changes
HiSax: Warning - no protocol specified
HiSax: using protocol EURO
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: HFC-S driver Rev. 1.8.6.1
HFCS: defined at 0x100 IRQ 10 HZ 100
HFCS: resetting card
Teles 16.3c: IRQ 10 count 0
Teles 16.3c: IRQ 10 count 0
Teles 16.3c: IRQ(10) getting no interrupts during init 1
HFCS: resetting card
bug: kernel timer added twice at c88eb144.
Teles 16.3c: IRQ 10 count 0
Teles 16.3c: IRQ(10) getting no interrupts during init 2
HFCS: resetting card
bug: kernel timer added twice at c88eb144.
Teles 16.3c: IRQ 10 count 0
Teles 16.3c: IRQ(10) getting no interrupts during init 3
HiSax: Card Teles 16.3c not installed !
----------------------------------------------------
marek cervenka
cervajs na fpf.slu.cz
cervajs na jabber.cz (www.jabber.cz)
----------------------------------------------------
Další informace o konferenci Linux