scsi : aborting command due to timeout
Ondrej Raska
or na miton.cz
Úterý Duben 16 14:42:04 CEST 2002
Dobrý den,
čím dál tím častěji se stane tato věc - systém zamrzne, load jde nahoru a v
/etc/log/messages je tato hlaska:
Apr 16 12:15:59 paja kernel: (scsi0:0:0:0) Synchronous at 40.0 Mbyte/sec,
offset 127.
Apr 16 12:15:59 paja kernel: SCSI bus is being reset for host 0 channel 0.
Apr 16 12:15:59 paja kernel: SCSI host 0 abort (pid 0) timed out - resetting
Apr 16 12:15:59 paja kernel: scsi : aborting command due to timeout : pid 0,
scsi0, channel 0, id 0, lun 0 Read (10) 00 01 71 1a d0 00 00 f0 00
Apr 16 12:15:59 paja kernel: scsi : aborting command due to timeout : pid 0,
scsi0, channel 0, id 0, lun 0 Read (10) 00 01 64 fb 78 00 00 10 00
Apr 16 12:15:59 paja kernel: scsi : aborting command due to timeout : pid 0,
scsi0, channel 0, id 0, lun 0 Read (10) 00 01 64 1e d0 00 00 08 00
Apr 16 12:15:59 paja kernel: scsi : aborting command due to timeout : pid 0,
scsi0, channel 0, id 0, lun 0 Read (10) 00 01 64 1e a8 00 00 08 00
Apr 16 12:15:59 paja kernel: scsi : aborting command due to timeout : pid 0,
scsi0, channel 0, id 0, lun 0 Read (10) 00 01 64 17 78 00 00 08 00
Jedná se o rh7.2 originalni jadro 2.4.9-21, používám ext3
cat /proc/scsi/aic7xxx/0
Adaptec AIC7xxx driver version: 5.2.4/5.2.0
Compile Options:
TCQ Enabled By Default : Enabled
AIC7XXX_PROC_STATS : Enabled
Adapter Configuration:
SCSI Adapter: Adaptec AIC-7892 Ultra 160/m SCSI host adapter
Ultra-160/m LVD/SE Wide Controller at PCI 1/3/0
PCI MMAPed I/O Base: 0xfebff000
Adapter SEEPROM Config: SEEPROM found and used.
Adaptec SCSI BIOS: Enabled
IRQ: 10
SCBs: Active 0, Max Active 32,
Allocated 62, HW 32, Page 255
Interrupts: 160897946
BIOS Control Word: 0x58f4
Adapter Control Word: 0x5c5e
Extended Translation: Enabled
Disconnect Enable Flags: 0xffff
Ultra Enable Flags: 0x0000
Tag Queue Enable Flags: 0x0001
Ordered Queue Tag Flags: 0x0001
Default Tag Queue Depth: 32
Tagged Queue By Device array for aic7xxx host instance 0:
{0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}
Actual queue depth per device for aic7xxx host instance 0:
{32,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
Statistics:
(scsi0:0:0:0)
Device using Wide/Sync transfers at 40.0 MByte/sec, offset 127
Transinfo settings: current(12/127/1/0), goal(9/127/1/2), user(9/127/1/2)
Total transfers 160895386 (104098889 reads and 56796497 writes)
< 2K 2K+ 4K+ 8K+ 16K+ 32K+ 64K+ 128K+
Reads: 22 0 71448521 13935573 7292173 2336218 2205140 6881242
Writes: 16 1 38452224 9324951 3004740 3117586 1171156 1725823
Mockrát děkuji za tip.
--
S pozdravem
Ondřej Raška
Další informace o konferenci Linux