HID a usb UPSka

[Tomas Hlavacek]

Dobry den, mam nasledujici problem:

/proc/bus/usb/drivers:
          usbdevfs
          hub
   0- 15: usblp
          hid

/proc/bus/ups/devices:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=051d ProdID=0002 Rev= 1.00
S:  Manufacturer=American Power Conversion
S:  Product=Back-UPS 500 FW: 6.3.I USB FW: c1
S:  SerialNumber=BB0204004503
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 30mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=hid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl= 10ms

lsmod:
[root na mars usb]# lsmod
Module                  Size  Used by    Not tainted
hid                    15232   0  (unused)
parport_pc             18564   1  (autoclean)
lp                      8768   0  (autoclean)
parport                31360   1  (autoclean) [uss720 parport_pc lp]
i2c-isa                 1892   0  (unused)
via686a                 9860   0
i2c-proc                7872   0  [via686a]
i2c-core               17184   0  [i2c-isa via686a i2c-proc]
autofs                 11780   0  (autoclean) (unused)
8139too                15712   1
mii                     2128   0  [8139too]
printer                 8256   0
input                   5408   0  [hid]
usb-uhci               24388   0  (unused)
usbcore                70464   1  [hid printer usb-uhci]

ale protoze UPSka je na usb pripojena, mel by byt hid used 1x. Zkousel 
jsem taky UPSku vythnout z USB a znovu pripojit a v logu se objevilo:

Aug 15 06:40:16 mars kernel: usb.c: USB disconnect on device 6
Aug 15 06:40:24 mars kernel: hub.c: USB new device connect on bus1/1, 
assigned device number 8
Aug 15 06:40:24 mars kernel: usb-uhci.c: interrupt, status 3, frame# 163
Aug 15 06:40:25 mars kernel: : USB HID v1.00 Joystick [American Power 
Conversion Back-UPS 500 FW: 6.3.I USB FW: c1 ] on usb1:8.0

ale hid driver je porad unused. Nerozumim tomu tomu Joysticku...

System a kernel jsou:

Red Hat Linux release 7.3 (Valhalla)
Kernel 2.4.18-3custom on an i686

samozrejmne mam zkompilovanou podporu pro hid (hid.o) a zaskrtl jsem 
podporu pro /dev/hid (kterou pak budu potrebovat k napojeni apcupsd na 
upsku...)

Predem dik
	Tomas

-- 
Tomas Hlavacek
Softmatch s r.o.
Mikulase z Husi 8
140 00  Praha 4
Czech republic

GSM#: +420 724 069 784
ICQ#: 103233265

Prosim, neposilejte mi prilohy ve formatech .doc nebo .ppt (PowerPoint)
Prectete si http://www.fsf.org/philosophy/no-word-attachments.cs.html

Please avoid sending me Word or PowerPoint attachments.
See http://www.fsf.org/philosophy/no-word-attachments.html