Doladeni USB isdn modemu FRITZ

[Zbynek Houska]

Dobry den,
  zkousel jsem nainstalovat ono zpominane "fxusb.ta.gz" pomoci
skriptu akce.sh. Zda se, ze se to povedlo - mam SuSE 8.0, ale vynoril
se du dalsi poroblem. Po vytoceni cisla modem zdechne, tady je
zaznam:

Plugin userpass.so loaded.
userpass: $Revision: 1.3 $
Plugin capiplugin.so loaded.
capiplugin: $Revision: 1.24 $
capiconn:  1.5
capiplugin: phase serialconn.
capiplugin: contr=1
controller 1: listen_change_state 0 -> 1
contr 1: listenconf Info=0x0000 (No additional information)
infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
plci_change_state:0x0 0 -> 1 event=1
capiplugin: dialing 0971100811 (hdlc)
plci_change_state:0x101 1 -> 2 event=3
capiplugin: "" -> "0971100811" outgoing (pcli=0x101/ncci=0x0): charge
in units: 1
plci_change_state:0x101 2 -> 3 event=6
ncci_change_state:0x101 0 -> 1 event=1
ncci_change_state:0x10101 1 -> 3 event=3
ncci_change_state:0x10101 3 -> 4 event=7
ncci 0x10101 up
capiplugin: connected: "" -> "0971100811" outgoing
(pcli=0x101/ncci=0x10101)
capiplugin: using /dev/capi/0: "" -> "0971100811" outgoing
(pcli=0x101/ncci=0x10101)
using channel 4
Using interface ppp0
Connect: ppp0 <--> /dev/capi/0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x473e5009> <pcomp>
<accomp>]
capiplugin: phase establish (was serialconn).
rcvd [LCP ConfReq id=0x99 <auth pap> <magic 0x3a0314b4> <mrru 1524>
<endpoint [local:48.72.61.64.65.63]>]
sent [LCP ConfRej id=0x99 <mrru 1524>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x473e5009> <pcomp>
<accomp>]
rcvd [LCP ConfReq id=0x9a <auth pap> <magic 0x3a0314b4> <endpoint
[local:48.72.61.64.65.63]>]
sent [LCP ConfAck id=0x9a <auth pap> <magic 0x3a0314b4> <endpoint
[local:48.72.61.64.65.63]>]
sent [LCP EchoReq id=0x0 magic=0x473e5009]
cbcp_lowerup
want: 2
capiplugin: phase authenticate (was establish).
sent [PAP AuthReq id=0x1 user="cb515714" password=<hidden>]
rcvd [LCP EchoRep id=0x0 magic=0x3a0314b4]
rcvd [PAP AuthNak id=0x1 16 41 75 74 68 65 6e 74 69 63 61 74 69 6f 6e
20 66 61 69 6c 65 64]
rcvd [LCP TermReq id=0x9b]
LCP terminated by peer
cbcp_lowerdown
capiplugin: phase terminate (was authenticate).
sent [LCP TermAck id=0x9b]
capiplugin: "" -> "0971100811" outgoing (pcli=0x101/ncci=0x10101):
charge in units: 1
ncci_change_state:0x10101 4 -> 7 event=10
ncci_change_state:0x10101 7 -> 0 event=13
plci_change_state:0x101 3 -> 7 event=8
DISCONNECT_IND reason 0x3490 (Normal call clearing) for plci 0x101
plci_change_state:0x101 7 -> 8 event=9
plci_change_state:0x101 8 -> 0 event=11
capiplugin: disconnect(remote): "" -> "0971100811" outgoing
(pcli=0x101/ncci=0x10101) 0x3490 (0x3301) - Normal call clearing
Modem hangup
capiplugin: phase dead (was terminate).
controller 1: listen_change_state 0 -> 1
contr 1: listenconf Info=0x0000 (No additional information)
infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
Connection terminated.
capiplugin: phase disconnect (was dead).
controller 1: listen_change_state 0 -> 1
contr 1: listenconf Info=0x0000 (No additional information)
infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
capiplugin: exit

Nejsem z toho ani trochu chytrej. Pomuze mi nekdo to napravit.
Ostatne SuSE dodava driver pro tuhle kartu, ale pri startu systemu je
karta "preskocena". Fakt nevim co s tim.

Zbynek

______________________________________________________________________
Reklama:
Jak si stoji kurz koruny? http://kurzy.seznam.cz