HD param

[Ladislav Kepsta]

Zdravim, v logoch sa po boote objavuju nasledujuce hlasky:

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdb: DMA disabled
ide0: reset: success

hdparam -i pise:

Model=ST310212A, FwRev=3.02, SerialNo=7EG1FXPE
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
 BuffType=unknown, BuffSize=512kB, MaxMultSect=32, MultSect=32
 CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=20005650
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes: pio0 pio1 pio2 pio3 pio4
 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2
 AdvancedPM=yes: unknown setting
 Drive Supports : Reserved : ATA-1 ATA-2 ATA-3 ATA-4 ATA-5

Laborovanie s hdparam neprinieslo ziadne pozitivne vysledky; kernel
2.4.17
Thx.

--
Ladislav Kepsta
kepsta na btlnet.com