Kouwell IDE radic

[Krištof Petr]

Krištof Petr wrote:

> 
> Ten radic uz odesel do vecnych lovist (zdravime Taiwan),
> takze to zkusim pozdeji znovu na 2.4.x. Mozna to nejelo
> prave kvuli HW chybe.
> 

Tak ani novy radic po nabootovani jadra 2.4.18 nejede.

CMD680: IDE controller on PCI bus 00 dev 50
PCI: Found IRQ 9 for device 00:0a.0
CMD680: chipset revision 2
CMD680: not 100% native mode: will probe irqs later
     ide2: BM-DMA at 0xa800-0xa807, BIOS settings: hde:pio, hdf:pio
     ide3: BM-DMA at 0xa808-0xa80f, BIOS settings: hdg:pio, hdh:pio
CMD680: IDE controller on PCI bus 00 dev 58
PCI: Found IRQ 10 for device 00:0b.0
CMD680: chipset revision 2
CMD680: not 100% native mode: will probe irqs later
     ide4: BM-DMA at 0x9000-0x9007, BIOS settings: hdi:pio, hdj:pio
     ide5: BM-DMA at 0x9008-0x900f, BIOS settings: hdk:pio, hdl:pio
hda: WDC AC11200L, ATA DISK drive
hde: WDC AC2850F, ATA DISK drive
hdf: 38WDC AC2850F, ATA DISK drive
hdg: WDC AC2850F, ATA DISK drive
hdh: 38WDC cC2870f, ATA DISK drive
hdi: WDC AC2850F, ATA DISK drive
hdj: 38WDC AC2850F, ATA DISK drive
hdk: WDC AC2850F, ATA DISK drive
hdl: 38WDC AC2850F, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2 at 0xd000-0xd007,0xb802 on irq 9
ide3 at 0xb400-0xb407,0xb002 on irq 9
ide4 at 0xa400-0xa407,0xa002 on irq 10
ide5 at 0x9800-0x9807,0x9402 on irq 10
blk: queue c037fc44, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c037fc44, I/O limit 4095Mb (mask 0xffffffff)
hda: 2503872 sectors (1282 MB) w/256KiB Cache, CHS=621/64/63, DMA
hde: 1667232 sectors (854 MB) w/64KiB Cache, CHS=1654/16/63, DMA
hdf: 0 sectors (0 MB) w/1KiB Cache, CHS=17018/0/88, DMA
hdf: INVALID GEOMETRY: 0 PHYSICAL HEADS?
hdh: 0 sectors (0 MB) w/1KiB Cache, CHS=17018/0/88
hdh: INVALID GEOMETRY: 0 PHYSICAL HEADS?
hdj: 0 sectors (0 MB) w/1KiB Cache, CHS=17018/0/88, DMA
hdj: INVALID GEOMETRY: 0 PHYSICAL HEADS?
hdl: 0 sectors (0 MB) w/1KiB Cache, CHS=17018/0/88, DMA
hdl: INVALID GEOMETRY: 0 PHYSICAL HEADS?
Partition check:
  hda: hda1 hda2
  hde: hde1
hdg: 1667232 sectors (854 MB) w/64KiB Cache, CHS=1654/16/63, DMA
hdi: 1667232 sectors (854 MB) w/64KiB Cache, CHS=1654/16/63, DMA
hdk: 1667232 sectors (854 MB) w/64KiB Cache, CHS=1654/16/63, DMA
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
  [events: 00000007]
md: autorun ...
md: considering hde1 ...
md:  adding hde1 ...
md: created md0
md: bind<hde1,1>
md: running: <hde1>
md: hde1's event counter: 00000007
md0: former device hdf1 is unavailable, removing from array!
md0: former device hdg1 is unavailable, removing from array!
md0: former device hdh1 is unavailable, removing from array!
md0: former device hdi1 is unavailable, removing from array!
md0: former device hdj1 is unavailable, removing from array!
md0: former device hdk1 is unavailable, removing from array!
md0: former device hdl1 is unavailable, removing from array!
kmod: failed to exec /sbin/modprobe -s -k md-personality-4, errno = 2
md: personality 4 is not loaded!
md :do_md_run() returned -22
md: md0 stopped.
md: unbind<hde1,0>
md: export_rdev(hde1)
md: ... autorun DONE.
md: hdf1 has zero size, marking faulty!
md: could not import hdf1, trying to run array nevertheless.
md: hdg1 has zero size, marking faulty!
md: could not import hdg1, trying to run array nevertheless.
md: hdh1 has zero size, marking faulty!
md: could not import hdh1, trying to run array nevertheless.
md: hdi1 has zero size, marking faulty!
md: could not import hdi1, trying to run array nevertheless.
md: hdj1 has zero size, marking faulty!
md: could not import hdj1, trying to run array nevertheless.
md: hdk1 has zero size, marking faulty!
md: could not import hdk1, trying to run array nevertheless.
md: hdl1 has zero size, marking faulty!
md: could not import hdl1, trying to run array nevertheless.
md: autorun ...
md: considering hde1 ...
md:  adding hde1 ...
md: created md0
md: bind<hde1,1>
md: running: <hde1>
md: hde1's event counter: 00000007
md0: former device hdf1 is unavailable, removing from array!
md0: former device hdg1 is unavailable, removing from array!
md0: former device hdh1 is unavailable, removing from array!
md0: former device hdi1 is unavailable, removing from array!
md0: former device hdj1 is unavailable, removing from array!
md0: former device hdk1 is unavailable, removing from array!
md0: former device hdl1 is unavailable, removing from array!
raid5: measuring checksumming speed
    8regs     :    82.000 MB/sec
    32regs    :    74.400 MB/sec
raid5: using function: 8regs (82.000 MB/sec)
md: raid5 personality registered as nr 4
md0: max total readahead window set to 1736k
md0: 7 data-disks, max readahead per data-disk: 248k
raid5: device hde1 operational as raid disk 0
raid5: not enough operational devices for md0 (7/8 failed)
RAID5 conf printout:
  --- rd:8 wd:1 fd:7
  disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hde1
  disk 1, s:0, o:0, n:1 rd:1 us:1 dev:[dev 00:00]
  disk 2, s:0, o:0, n:2 rd:2 us:1 dev:[dev 00:00]
  disk 3, s:0, o:0, n:3 rd:3 us:1 dev:[dev 00:00]
  disk 4, s:0, o:0, n:4 rd:4 us:1 dev:[dev 00:00]
  disk 5, s:0, o:0, n:5 rd:5 us:1 dev:[dev 00:00]
  disk 6, s:0, o:0, n:6 rd:6 us:1 dev:[dev 00:00]
  disk 7, s:0, o:0, n:7 rd:7 us:1 dev:[dev 00:00]
raid5: failed to run raid set md0
md: pers->run() failed ...
md :do_md_run() returned -22
md: md0 stopped.
md: unbind<hde1,0>
md: export_rdev(hde1)
md: ... autorun DONE.




-- 
Chief B.O.F.H. Officer
When proprietary sux - JabberID: kristof.p na njs.netlab.cz