cdrecord - hardware error?
Michal Vymazal
gandalf na mbox.vol.cz
Úterý Leden 14 08:46:45 CET 2003
Stepan Kadlec wrote:
> pekny den,
> po upgrade na rh8.0 se mi objevil tento problem s vypalovanim.
> cdrecord hlasi hardware error, ale zkusil jsem kvuli tomu rozjet windows a
> tam to vypalovalo v poradku. navic pred tim jsem s uplne stejnym postupem
> vypaloval na RH7.3 bez problemu. cist lze v poradku. scsi emulaci a s tim
> spojene veci mam samozrejme rozchozene. zde jsou vypisy:
>
> [steve na kadlec tmp]# cdrecord --scanbus
> Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jrg Schilling
> Linux sg driver version: 3.1.24
> Using libscg version 'schily-0.5'
> scsibus0:
> 0,0,0 0) 'TEAC ' 'CD-W540E ' '1.0C' Removable CD-ROM
> 0,1,0 1) *
> 0,2,0 2) *
> ...
> [steve na kadlec tmp]# cdrecord -v -dummy pokus.iso
> ...
> ...
> Starting to write CD/DVD at speed 16 in dummy mode for single session.
> Last chance to quit, starting dummy write in 0 seconds. Operation
> starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Starting new track at sector: 772
> Track 01: 1 of 21 MB written (fifo 97%).cdrecord: Input/output
> error.
> write_g1: scsi sendcmd: no error
> CDB: 2A 00 00 00 05 51 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00
> Sense Key: 0x4 Hardware Error, Segment 0
> Sense Code: 0x08 Qual 0x03 (logical unit communication crc error
> (ultra-dma/32)) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.002s timeout 40s
> write track data: error after 1206272 bytes
> Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
> Writing time: 8.622s
> Fixating...
> WARNING: Some drives don't like fixation in dummy mode.
> Fixating time: 20.032s
> cdrecord: fifo had 147 puts and 20 gets.
> cdrecord: fifo was 0 times empty and 3 times full, min fill was 93%
>
> [steve na kadlec tmp]$ uname -srmpio
> Linux 2.4.18-19.8.0custom i686 athlon i386 GNU/Linux
>
> mate napad, kde je chyba? dekuji za pomoc.
> stepan
Kdysi se mi stalo pod RH 7.2 neco podobneho a od te doby palim s cdrecord z
PLD linuxu (v soucasnosti pod RH 7.3). Vypada to, ze RH kompiluji cdrecord
s nejakymi direktivami, ktere "nechutnaji" vsem mechanikam. Kazdopadne -
dma mam pro cdrw mechaniku vypnute.
--
Michal Vymazal
gandalf na mbox.vol.cz
Office Computer
Další informace o konferenci Linux