cdrecord - hardware error?

Stepan Kadlec steve na students.zcu.cz
Pondělí Leden 13 20:52:47 CET 2003


pekny den,
        po upgrade na rh8.0 se mi objevil tento problem s vypalovanim.
cdrecord hlasi hardware error, ale zkusil jsem kvuli tomu rozjet windows a
tam to vypalovalo v poradku. navic pred tim jsem s uplne stejnym postupem
vypaloval na RH7.3 bez problemu. cist lze v poradku. scsi emulaci a s tim
spojene veci mam samozrejme rozchozene. zde jsou vypisy:

  [steve na kadlec tmp]# cdrecord --scanbus
  Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jrg Schilling
  Linux sg driver version: 3.1.24
  Using libscg version 'schily-0.5'
  scsibus0:
  0,0,0     0) 'TEAC    ' 'CD-W540E        ' '1.0C' Removable CD-ROM
  0,1,0     1) *
  0,2,0     2) *
  ...
  [steve na kadlec tmp]# cdrecord -v -dummy pokus.iso
  ...
  ...
  Starting to write CD/DVD at speed 16 in dummy mode for single session.
  Last chance to quit, starting dummy write in 0 seconds. Operation
starts.
  Waiting for reader process to fill input buffer ... input buffer ready.
  Starting new track at sector: 772
  Track 01:   1 of  21 MB written (fifo  97%).cdrecord: Input/output
error.
  write_g1: scsi sendcmd: no error
  CDB:  2A 00 00 00 05 51 00 00 1F 00
  status: 0x2 (CHECK CONDITION)
  Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00
  Sense Key: 0x4 Hardware Error, Segment 0
  Sense Code: 0x08 Qual 0x03 (logical unit communication crc error
(ultra-dma/32)) Fru 0x0
  Sense flags: Blk 0 (not valid)
  cmd finished after 0.002s timeout 40s
  write track data: error after 1206272 bytes
  Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
  Writing  time:    8.622s
  Fixating...
  WARNING: Some drives don't like fixation in dummy mode.
  Fixating time:   20.032s
  cdrecord: fifo had 147 puts and 20 gets.
  cdrecord: fifo was 0 times empty and 3 times full, min fill was 93%

  [steve na kadlec tmp]$ uname -srmpio
  Linux 2.4.18-19.8.0custom i686 athlon i386 GNU/Linux

mate napad, kde je chyba? dekuji za pomoc.
stepan

  (p.s. zkousel jsem to i s originalnim jadrem.
   p.s.2  a neni to tim, ze to vypaluju v dummy modu)



Další informace o konferenci Linux