Nefunkcni PCMCIA disk po aktualizaci jadra

[Vladimír Volčko]

DD!

    Pro rozchozeni ACPI jsem stahl a zkompiloval jadro 2.4.21-rc5. Vse je skoro v poradku az na to ze prestal fungovat staricky PCMCIA disk, ktery na puvodnim RH9 distribucnim jadre chodil. Dostavam nasledujici hlasky:
May 29 19:18:35 r2 cardmgr[3757]: socket 0: ATA/IDE Fixed Disk
May 29 19:18:35 r2 cardmgr[3757]: executing: 'modprobe ide-cs'
May 29 19:18:39 r2 kernel: hde: Integral Peripherals 8340PA, ATA DISK drive
May 29 19:18:39 r2 kernel: hde: IRQ probe failed (0x22f8)
May 29 19:18:39 r2 kernel: ide2: DISABLED, NO IRQ
May 29 19:18:41 r2 kernel: ide2: ports already in use, skipping probe
May 29 19:18:54 r2 last message repeated 8 times
May 29 19:18:54 r2 kernel: ide_cs: ide_register() at 0x100 & 0x10e, irq 0 failed 


Pro priklad uvadim vypis pro funkcni konfiguraci s jadrem rh9 2.4.20-13.9:
May 29 19:21:18 r2 cardmgr[2706]: socket 0: ATA/IDE Fixed Disk
May 29 19:21:18 r2 cardmgr[2706]: executing: 'modprobe ide-cs'
May 29 19:21:23 r2 kernel: hde: Integral Peripherals 8340PA, ATA DISK drive
May 29 19:21:23 r2 kernel: ide2 at 0x100-0x107,0x10e on irq 3
May 29 19:21:23 r2 kernel: ide-floppy driver 0.99.newide
May 29 19:21:23 r2 kernel: hde: attached ide-disk driver.

Zrejme jsem neco opomenul pri kompilaci jadra, nebot stejny vysledek  dostavam i pri rucni kompilaci distribucniho jadra 2.4.20-13.9.
Nenanapada nekoho, kde by mohl byt zakopan pes?

S pozdravem Vladimir Volcko