Fedora a problem se zvukem na TV karte PV951
DJ Deep
dj-deep na quick.cz
Čtvrtek Listopad 20 20:38:47 CET 2003
Nainstaloval jsem si na vyskouseni linux RH Fedora CORE1
a jediny zatim neprekonany problem je s TV tunerem PV-951 (3Dvision)
konfigurace ktera pod RH7.3 a RH9 chodila perfektne nejde.
Jde pouze obraz zvuk jen silne sumi. skousel jsem ruzne menit
options bttv card=42 tuner=28 radio=1
podle dokumentu v /usr/src/linux/Documentation/video4linux/*
a zvuk nezvuci pouze sum
asi zacnu postupe skouset vsechy parametry tech modulu
(nebo hura na debiana RH je od verze 8 takovej volakej ....)
........./etc/modules.conf..............................................
alias char-major-89 i2c-dev
options i2c-core i2c_debug=1
options i2c-algo-bit bit_scan=1
alias char-major-81 videodev
alias char-major-81-0 bttv
alias char-major-81-64 bttv
options bttv card=42 tuner=28 radio=1
post-install bttv insmod tvaudio
post-remove bttv rmmod tvaudio
options tuner debug=1
alias sound-slot-1 btaudio
#alias char-major-61 lirc_i2o
#alias char-major-61-0 lirc_dev
................/var/log/messages..........................................
Linux video capture interface: v1.00
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.107 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is ALi Corporation M1621
bttv: Bt8xx card found (0).
PCI: Found IRQ 9 for device 00:0e.0
PCI: Sharing IRQ 9 with 00:0e.1
bttv0: Bt878 (rev 17) at 00:0e.0, irq: 9, latency: 64, mmio: 0xdddfe000
bttv0: using: BT878(ProVideo PV951) [card=42,insmod option]
i2c-algo-bit.o: scanning bus bt848 #0.
...........................................................................(4b)............(58).......(60)...............................
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: using tuner=1
bttv0: i2c: checking for TDA9875 @ 0xb0... found
i2c-core.o: driver i2c tda9875 driver registered.
tda9875: no such chip at 0xb0 (dic=0x11 rev=0x2)
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
(PV951),ta8874z
i2c-core.o: driver generic i2c audio driver registered.
tvaudio: found pic16c54 (PV951) @ 0x96
i2c-core.o: client [pic16c54 (PV951)] registered to adapter [bt848 #0](pos.
0).
tvaudio: found tda9874a.
tvaudio: found tda9874h/a @ 0xb0
i2c-core.o: client [tda9874h/a] registered to adapter [bt848 #0](pos. 1).
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc0
tuner: type set to 1 (Philips PAL_I (FI1246 and compatibles))
i2c-core.o: client [Philips PAL_I (FI1246 and compa] registered to adapter
[bt848 #0](pos. 2).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
insmod:/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/media/video/bttv.o:
post-install bttv failed
insmod: /lib/modules/2.4.22-1.2115.nptl/kernel/drivers/media/video/bttv.o:
insmod char-major-81-0 failed
desktop modprobe: modprobe: Can't locate module char-major-81-1
Creative EMU10K1 PCI Audio Driver, version 0.20, 15:51:24 Oct 29 2003
PCI: Found IRQ 9 for device 00:12.0
emu10k1: EMU10K1 rev 6 model 0x8027 found, IO at 0xdf00-0xdf1f, IRQ 9
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
desktop modprobe: modprobe: Can't locate module sound-service-0-0
btaudio: driver version 0.7 loaded [digital+analog]
PCI: Found IRQ 9 for device 00:0e.1
PCI: Sharing IRQ 9 with 00:0e.0
btaudio: Bt878 (rev 17) at 00:0e.1, irq: 9, latency: 64, mmio: 0xdddff000
btaudio: using card config "default"
btaudio: registered device dsp2 [digital]
btaudio: registered device dsp3 [analog]
btaudio: registered device mixer1
modprobe: modprobe: Can't locate module sound-service-1-0
Další informace o konferenci Linux