OpenVPN

[Ondrej Koala Vacha]

On Sun, 19 Dec 2004, Bretislav Duda wrote:

> Nepochopil jsem vazbu ip lan na ip tunelu
>
> CENTRALA - eth1 192.168.1.10 a vnejsi eth0 194.212.26.175
>
> POBOCKA1 - eth1 192.168.2.10 a vnejsi eth0 84.244.78.70
>
> Jak bude vypadat konf openvpn - remote a ifonfig na obou stranach pripadne
> route aby se obe site videli navzajem?
>
> Proc je tady v popisu ifconfig 192.168.1.10 255.255.255.0 I jinde na www
> treba 192.168.99.1 192.168.99.2 -  v cem je rozdil
>
> Takto?
> CENTRALA
> #remote 84.244.78.70
> #ifconfig 192.168.1.10 255.255.255.0
# tady remote nema co delat a v ifconfig musi byt IP tunelu, treba
# 10.1.0.1 is our local VPN endpoint (office).
# 10.1.0.2 is our remote VPN endpoint (home).
ifconfig 10.1.0.1 10.1.0.2
# viz HOWTO openvpn

> port 5001
> proto udp
> dev tap0
> secret /etc/openvpn/secret.key
> ping 10
> comp-lzo
> verb 5
> mute 10
> user openvpn
> group openvpn
>
> POBOCKA
> remote 194.212.26.175
># ifconfig 192.168.2.10 255.255.255.0
ifconfig 10.1.0.2 10.1.0.1
#tunel opacne


> port 5001
> proto udp
> dev tap0
> secret /etc/openvpn/secret.key
> ping 10
> comp-lzo
> verb 5
> mute 10
> user openvpn
> group openvpn
>

Podivejte se na HOWTO a udelejete to podle toho, jsou tam hezke ukazky

s pozdravem

--
Ondrej Koala Vacha