iPAQ usb-storage

[Aben Siatris]

dostal som do ruk iPAQ 4150 a ked je v docku, rad by
som storage primountoval v linuxe. jadro mam 2.6.1-mm.
intuitivne som nacompiloval modul kernelu pre usb serial ipaq

lsusb:
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 005: ID 03f0:1016 Hewlett-Packard Jornada 548 Pocket PC
Bus 001 Device 001: ID 0000:0000

dmesg:
hub 1-0:1.0: new USB device on port 2, assigned address 5
drivers/usb/serial/usb-serial.c: descriptor matches
drivers/usb/serial/usb-serial.c: found bulk in
drivers/usb/serial/usb-serial.c: found bulk out
usbserial 1-2:1.0: PocketPC PDA converter detected
drivers/usb/serial/usb-serial.c: get_free_serial 1
drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0
drivers/usb/serial/usb-serial.c: usb_serial_probe - setting up 1 port structures for this device
drivers/usb/serial/ipaq.c: ipaq_startup
drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0
usb 1-2: PocketPC PDA converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
usb 1-2: USB disconnect, address 5
drivers/usb/serial/usb-serial.c: usb_serial_disconnect
drivers/usb/serial/usb-serial.c: destroy_serial -
drivers/usb/serial/usb-serial.c: serial_shutdown
drivers/usb/serial/ipaq.c: ipaq_shutdown
drivers/usb/serial/usb-serial.c: return_serial
PocketPC PDA ttyUSB0: PocketPC PDA converter now disconnected from ttyUSB0
drivers/usb/serial/usb-serial.c: port_release - ttyUSB0
usbserial 1-2:1.0: device disconnected

a tu som skoncil. neviem kade dalej.
ma niekto tuto "veselu krabicku" tiez a vie ako na to?
rad by som robil aspon manualne synchronizovanie nejakych dokumentov, etc...