2x eth - data medzi nimi po kabli ?

[Zdenek Mazanec]

> > routovaci tabulkou?
> mohli by ste prosim uviest priklad, lebo
>
> [root na 004 root]# ip ro
> 192.168.1.0/24 dev eth0  scope link
> 10.1.1.0/24 dev wlan0  proto kernel  scope link  src 10.1.1.1
> 127.0.0.0/8 dev lo  scope link
> default via 192.168.1.111 dev eth0
>
>
> [root na 004 root]# ip ad
> 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
>      inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
> 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
>      inet 192.168.1.11/24 brd 192.168.78.255 scope global eth0
> 3: eth1: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc pfifo_fast qlen
> 1000
>      link/ether 00:0d:87:70:3f:fe brd ff:ff:ff:ff:ff:ff
>      inet 10.1.1.1/24 scope global wlan0
>
> [root na 004 root]# ping 10.1.1.1
> PING 10.1.1.1 (10.1.1.1) 56(84) bytes of data.
> 64 bytes from 10.1.1.1: icmp_seq=0 ttl=64 time=0.033 ms
>
> --- 10.1.1.1 ping statistics ---
> 1 packets transmitted, 1 received, 0% packet loss, time 0ms
>                                     ^^^^^^^^^^^^^^ a nie su prepojene

Musite z routovaci tabulky vyhodit odkaz na sitovku s 10.1.1.1 Pak to bude
fungovat pres kabel. Osobne ale nevidim prinos takove konfigurace.

-- 
Zdenek Mazanec, Contactel s.r.o.
http://mandrake.contactel.cz
Silver MandrakeClub Member