2x eth - data medzi nimi po kabli ?

[Zdenek SUTR Kaminski]

On Tue, 13 Jul 2004, Zdenek Mazanec wrote:

> > > routovaci tabulkou?
> > mohli by ste prosim uviest priklad, lebo
> >
> > [root na 004 root]# ip ro
> > 192.168.1.0/24 dev eth0  scope link
> > 10.1.1.0/24 dev wlan0  proto kernel  scope link  src 10.1.1.1
> > 127.0.0.0/8 dev lo  scope link
> > default via 192.168.1.111 dev eth0
> >
> >
> > [root na 004 root]# ip ad
> > 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
> >      inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
> > 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
> >      inet 192.168.1.11/24 brd 192.168.78.255 scope global eth0
> > 3: eth1: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc pfifo_fast qlen
> > 1000
> >      link/ether 00:0d:87:70:3f:fe brd ff:ff:ff:ff:ff:ff
> >      inet 10.1.1.1/24 scope global wlan0
> >
> > [root na 004 root]# ping 10.1.1.1
> > PING 10.1.1.1 (10.1.1.1) 56(84) bytes of data.
> > 64 bytes from 10.1.1.1: icmp_seq=0 ttl=64 time=0.033 ms
> >
> > --- 10.1.1.1 ping statistics ---
> > 1 packets transmitted, 1 received, 0% packet loss, time 0ms
> >                                     ^^^^^^^^^^^^^^ a nie su prepojene
> 
> Musite z routovaci tabulky vyhodit odkaz na sitovku s 10.1.1.1 Pak to bude
> fungovat pres kabel. Osobne ale nevidim prinos takove konfigurace.

No, nejsem si jisty, mozna mlznim, nicmene ty pakety pujdou pres zarizeni 
loopback... Cili tak jednoduche to nebude...

Z.K.
-- 
Wallachian Laboratories? Freeride in UN*X systems...