napalovanie linux CDR CDRW kernel .config

[AntiTrust - AT]

Na http://www.linuxhelp.net/guides/idecdr/
[Created on December 27th, 1999. !!]
som sa docital, ze
Block devices

<*>    Include IDE/ATAPI CDROM support
<M>    SCSI emulation support

Make sure you have it set up this way with the SCSI emulation as a 
module. If you statically compile both IDE CDROM and SCSI emulation into 
the kernel or the CDROM will be detected before the SCSI emulation at 
boot time and you will not be able to burn cds.

SCSI Support.

<M> SCSI support
<M> SCSI CD-ROM support
[*]   Enable vendor-specific extensions (for SCSI CDROM)
<M> SCSI generic support
[*] Probe all LUNs on each SCSI device
[*] Verbose SCSI error reporting (kernel size +=12K)


********
Moja konfiguracia vyzera takto:

< CONFIG_BLK_DEV_IDESCSI=m
---
 > CONFIG_BLK_DEV_IDESCSI=y
392c392
< CONFIG_BLK_DEV_SR_VENDOR=y
---
 > # CONFIG_BLK_DEV_SR_VENDOR is not set
398c398
< CONFIG_SCSI_CONSTANTS=y
---
 > # CONFIG_SCSI_CONSTANTS is not set


Enable vendor-specific extensions (for SCSI CD-ROM)
CONFIG_BLK_DEV_SR_VENDOR
   This enables the usage of vendor specific SCSI commands. This is
   required to support multisession CDs with old NEC/TOSHIBA cdrom
   drives (and HP Writers). If you have such a drive and get the first
   session only, try saying Y here; everybody else says N.



Podla mna - imHo su tieto odporucania blbost, nakolko 
CONFIG_BLK_DEV_SR_VENDOR by som podla Configure.help mal pouzit iba v 
specifickych pripadoch, nie pre bezne ATAPI napalovacky.

Nechal by som to tak, ale 1 odbornik (on sa prehlasuje ;) tvrdi, ze to 
tak ma byt (presne sa uz nepamata preco).


Vase skusenosti?

AT


-=x=-
Skontrolované antivírovým programom NOD32