dhcpd a eth0 + eth0:0

Peter Surda shurdeek na routehat.org
Čtvrtek Březen 4 22:35:04 CET 2004


On Thu, Mar 04, 2004 at 10:16:29PM +0100, scud_mlist na seznam.cz wrote:
> Zravim vsechny,
> 
> marne se pokousim rozbehat dhcpd ( 3.0pl2 z isc.org ) na jednom interfacu 
> se zvema sitemi tak, aby fungovalo pro obe site
[cut]
to sa robi tak, ze definicie subnetov uzavries do spolu do shared-network.

Nebolo to tu NAHODOU minuly tyzden? Nehovori NAHODOU man dhcpd.conf:
---------------------------------------------------------------
Some  installations have physical networks on which more than one IP subnet
operates.   For example, if there is a site-wide requirement that 8-bit subnet
masks be used, but a department with a single physical ethernet network
expands to the point where it has more than  254  nodes, it may be necessary
to run two 8-bit subnets on the same ethernet until such time as a new
physical network can be added.   In this case, the subnet declarations for
these two networks may be enclosed in a shared-network declaration.
---------------------------------------------------------------
?

> Pri odkomentovanych obou sekcich daemon ani nenastartuje.
A to vsetko samozrejme bez akehokolvek chyboveho hlasenia, ze?

> - Jiri Kral
S pozdravom,

Peter Surda (Shurdeek) <shurdeek na routehat.org>, ICQ 10236103, +436505122023

-- 
            Give a man a fish and you feed him for a day;
     teach him to use the Net and he won't bother you for weeks.


Další informace o konferenci Linux