nejde mi USB flash disk HP v CentOS 4 (dlhsie)

[iko]

zdravim vospolok,

nedavno som upgradoval RedHat 9 na CentOS 4 (prekompilovany, aj 
distribucny kernel 2.6.9-22.0.1.EL) a zrazu mi prestal chodit moj USB 
flash disk HP Drive Key. Predtym v RedHate mi isiel. Chybu HW vylucujem, 
pri nabotovani Slax live cd mi usb disk rozpozna takto:

<dmesg>
usb 1-2: new high speed USB device using ehci_hcd and address 2
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
   Vendor: hp        Model: Drive Key         Rev: 4.71
   Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sda: 239872 512-byte hdwr sectors (123 MB)
sda: Write Protect is off
sda: Mode Sense: 45 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 239872 512-byte hdwr sectors (123 MB)
sda: Write Protect is off
sda: Mode Sense: 45 00 00 08
sda: assuming drive cache: write through
  sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
usb-storage: device scan complete
</dmesg>

v CentOS mi ale pise toto (zapol som aj debug na usb-storage):
<dmesg>
usb 1-1: new high speed USB device using address 2
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: default language 0x0409
usb 1-1: Product: Drive Key
usb 1-1: Manufacturer: hp
usb 1-1: SerialNumber: 0800DA4142E1ADD5
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usb-storage 1-1:1.0: usb_probe_interface
usb-storage 1-1:1.0: usb_probe_interface - got id
usb-storage: USB Mass Storage device detected
usb-storage: -- associate_dev
usb-storage: Vendor: 0x03f0, Product: 0x0023, Revision: 0x0200
usb-storage: Interface Subclass: 0x06, Protocol: 0x50
usb-storage: Vendor: hp,  Product: Drive Key
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
usb-storage: GetMaxLUN command result is 1, data is 0
usb-storage: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage:  12 00 00 00 24 00
usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
usb-storage: Status code 0; transferred 13/36
usb-storage: -- short transfer
usb-storage: Bulk data transfer result 0x1
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code -75; transferred 0/13
usb-storage: -- babble
usb-storage: Bulk status result = 3
usb-storage: -- transport indicates error, resetting
usb-storage: usb_stor_Bulk_reset called
usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
usb-storage: command_abort called
usb-storage: Soft reset: clearing bulk-in endpoint halt
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: Soft reset: clearing bulk-out endpoint halt
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: Soft reset done
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage:  00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x1 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
atd...
</dmesg>

neviete mi niekto poradit co mam s tym robit? kolega Google mi 
neporadil... :(

dakujem
iko

-- 
Odchadzajuca sprava obsahuje 163 virusov.
The outgoing message contain 163 unwanted surprises
Skontrolovane Antivirusovým systemom KFC.
Verzia: 7.2.130 / Vírusová databáza: 562.2.5