3g modem

[Jan Hrach]

Používám E352 a E3131 s řádkovým pppd. Zkusil bych to s tím, já tady těm high-level nástrojům moc nevěřím.

~ # cat /etc/ppp/peers/t-cenzor 
/dev/ttyUSB0
115200
defaultroute
usepeerdns
nodetach
crtscts
lock
noauth
local
debug
nodeflate

connect "/usr/sbin/chat -v -f /etc/chatscripts/t-cenzor-connect"
disconnect "/usr/sbin/chat -v -f /etc/chatscripts/t-cenzor-disconnect"

~ # cat /etc/chatscripts/t-cenzor-connect
TIMEOUT 10
ABORT 'BUSY'
ABORT 'NO ANSWER'
ABORT 'ERROR'

"" 'ATZ'

SAY 'Setting APN FQDN\n'
OK 'AT+CGDCONT=1,"IP","internet.t-mobile.cz"'

ABORT 'NO CARRIER'
SAY 'Dialling!\n'
OK 'ATD*99***1#'
CONNECT ''



On 22.1.2015 21:45, Peter Urban wrote:
> Zdravim,
> 
> pouzivate niekto 3G modem HUAWEI E1752 alebo E 173?
> Nejako sa mi nedari ich zfunkcnit ani s Network manager ani s wvdial.
> 
> 
> 
> 
> 
> 
> 
> Scanning your serial ports for a modem.
> 
> Modem Port Scan<*1>: S0   S1   S2   S3
> ttyUSB0<*1>: ATQ0 V1 E1 -- OK
> ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
> ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
> ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
> ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
> ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- COMMAND NOT SUPPORT
> ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: huawei
> ttyUSB0<*1>: Speed 9600: AT -- OK
> ttyUSB0<*1>: Max speed is 9600; that should be safe.
> ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
> ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
> ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
> ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
> 
> Found a modem on /dev/ttyUSB0.
> Modem configuration written to /etc/wvdial.conf.
> ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2"
> 
> 
> 
> --> WvDial: Internet dialer version 1.61
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2
> ATQ0 V1 E1 S0=0 &C1 &D2
> OK
> --> Sending: AT+CGDCONT=1,"IP","internet"
> AT+CGDCONT=1,"IP","internet"
> OK
> --> Modem initialized.
> --> Sending: ATDT*99#
> --> Waiting for carrier.
> ATDT*99#
> CONNECT 7200000
> --> Carrier detected.  Starting PPP immediately.
> --> Starting pppd at Thu Jan 22 21:25:30 2015
> --> Pid of pppd: 10362
> --> Using interface ppp0
> --> Disconnecting at Thu Jan 22 21:25:39 2015
> --> The PPP daemon has died: A modem hung up the phone (exit code = 16)
> --> man pppd explains pppd error codes in more detail.
> --> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.
> --> Auto Reconnect will be attempted in 5 seconds
> 
> ----------
> Zoner Photo Studio 16 s rozsirenim pre celu domacnost len za 39 EUR
> 
> Najdite si strateny alebo ukradnuty telefon pomocou aplikacie Zoner AntiVirus Free pre Android
> 
> Domeny .SK len za 12.29 EUR
> 
> Skvele knihy z vydavatelstva Zoner Press
> 
> Mam rad Android - klikni tu
> _______________________________________________
> Linux mailing list
> Linux na linux.cz
> http://www.linux.cz/mailman/listinfo/linux
> 

-- 
Jan Hrach, http://jenda.hrach.eu/
GPG CD98 5440 4372 0C6D 164D A24D F019 2F8E 6527 282E