BG: jak docasne 10Mbit s ENW 9501+

[radek.karaffa na ct.cz]

> -----Původní zpráva-----
> Od: outbound na centrum.cz [mailto:outbound na centrum.cz]
> Odesláno: 7. listopadu 2001 18:56
> Komu: outbound na centrum.cz; linux na linux.cz
> Předmět: RE: BG: jak docasne 10Mbit s ENW 9501+
> 
> Jen tak jsem toto nechal vypsat u nas, mame nejakou Planet 100Mbit na
> 100Mbit lince, ale kdyz dam
> mii-tool -v vypise to toto:
> 
> product info: vendor 00:00:00, model 0 rev 0
> basic mode:   10 Mbit, half duplex
> basic status: no link
> capabilities:
> advertising:
> 
> Znamena to ze jede jen na 10 Mbit ???? A pokud jo jak to prepnout na
100 ?
> 
> Diky, R.
> 

Najeke divne, jako kdyby tam zadna karta nebyla
podle mne je dulezity 1. radek vypisu
me to pise tohle (RH71 bez uprav):
v portu 10MB

[root na rknb /root]# mii-tool -v
eth0: negotiated 10baseT-FD, link ok
  product info: TDK 78Q2120 rev 11
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  link partner: 10baseT-FD 10baseT-HD flow-control

v portu 100MB

[root na rknb /root]# mii-tool -v
eth0: negotiated 100baseTx-FD, link ok
  product info: TDK 78Q2120 rev 11
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD

radek.karaffa na ct.cz