Divna chyba pri cdrecord

[Zdenek Zikan]

Zdravim.

Narazil jsem na neco, s cim jsem se jeste pri vypalovani nesetkal.
Neslo mi vymazat CD-RW z K3b, tak jsem to zkusil primo cdrecordem.
Zkousel jsem to jak pod normalnim uzivatelem, tak pod rootem, zkousel
jsem i -force, vysledek byl vzdy stejny. Pritom na to CD jsem uz
(myslim) zapisoval.
Kdyz jsem to pak zkousel ve Windows v Neru, tak to bylo OK.

Diky za pripadne rady.

$ cdrecord blank=all /dev/cdrom
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent
defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to
http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in
this version.
cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using
setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/cdrom'
devname: '/dev/cdrom'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version
(schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c
1.83 04/05/20 Copyright 1997 J. Schilling').
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'MATSHITA'
Identifikation : 'DVD-RAM UJ-811  '
Revision       : 'H102'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO
cdrecord: WARNING: Total disk size unknown. Data may not fit on disk.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using
setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
Speed set to 706 KB/s
Starting to write CD/DVD at speed   4.0 in real TAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
cdrecord: Success. blank unit: scsi sendcmd: no error
CDB:  A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 AA 00 00 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format)
Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 9600s
cdrecord: Cannot blank disk, aborting.